GYS Multi-Pearl 200.4XL Multi-Process 1ph Dual Voltage MIG/TIG/MMA 200Amp
£1,190.00 ex.VAT
Featuring inverter technology, the MULTIPEARL 200.4XL combines the MIG, TIG and MMA processes in a single product. Compact and lightweight, it will be an ideal ally on site and in maintenance workshops. It is suitable for welding most common materials (steel, stainless steel, aluminium and MIG brazing CuSi3).
Full product description of GYS Multi-Pearl
GYS Multi-Pearl
Featuring inverter technology, the MULTIPEARL 200.4XL combines the MIG, TIG and MMA processes in a single product. Compact and lightweight, it will be an ideal ally on site and in maintenance workshops. It is suitable for welding most common materials (steel, stainless steel, aluminium and MIG brazing CuSi3).
The welding current ranges from 20 to 200Amp in MIG and 10 to 200Amp in TIG/MMA (arc) and welding steel wire from Ø 0.6 to 1.0mm and aluminium wire from Ø 0.8 to 1.0mm. It can also weld gasless using a cored wire.
The Multipearl has synergic control in MIG mode (10 synergies recorded) just enter material type/thickness, wire size & gas used & the machine sets the power & wire speed automatically. It features a 4 roller wire feed system making it ideal for welding aluminium, takes 5kg or 15kg wire reels. It is also capable of welding in DC TIG mode with TIG LIFT arc ignition (optional TIG torch required).
MMA mode features Hotstart for easy arc striking & has an adjustable arc force function (low for thin material, high for thicker material). The ergonomic and intuitive interface makes set up fast & easy. PFC technology allows use on 13Amp supply & on long extension leads (up to 100m).
Single-phase power supply either 110V or 240V – 16A (PFC & FV technologies).
- Input voltage 85V to 265V
- Welding Range 20-200Amps MIG
- Takes 0.6-1mm wire
- 200Amps from13A supply
- Generator Requirement 7.5kW or 9kVA
Here at lincweld, we work hard to make sure all our customers get the best product. They need it at the right price.
We have a wide collection of mig, tig, and stick welding machines available. check them out.
Related products
MULTIWELD FV 220M-C
GYS ProTIG 201 AC/DC TIG Welding Machine with Torch & Accessories
- AC Easy automatically controls AC balance & fequency
- 2T, 4T & 4T LOG trigger modes (controls hot/cold current switching from torch)
- Welds standard rutile, basic (low hydrogen), stainless & cast iron electrodes
- Store up to 50 pre-set welding parameters
- Foot pedal compatible
- Delivered complete with Binzel TIG torch (4m)
- Weighs only 15kg
- Generator friendly (7.5kW)
- Protec 400 equipped provides overvoltage protection up to 400V
Galaxy 400T Duo without accessories Pulse MIG
MULTI-PROCESS
MIG/MAG Pulse: This adaptable unit can be equipped with the optional WF 36 wire feeder, allowing quick switching between two wire types or diameters.
-
Steel and stainless steel wire: Ø 0.6 to 1.2 mm
-
Aluminium wire: Ø 0.8 to 1.2 mm
-
Flux-cored wire (inverted polarity): Ø 0.9 to 1.6 mm
MMA DC / Pulse: compatible with basic and rutile electrodes.
TIG DC Lift / Pulse.
PREMIUM MIG/MAG WELDING
4 selectable welding modes:
-
Standard: ideal for quick and easy welding tasks.
-
Pulse: minimises spatter and touch-ups across all welding positions.
-
ModulArc: excellent for welding aluminium alloys with a high-quality finish.
-
Manual: tailored for skilled welders and DMOS-specific work.
Advanced arc control ensures immediate ignition and prevents cratering at the end of the weld.
Pulse arc mode enables up to 30% faster welding speeds.
4-roll motorised wire feeder with digital encoder for accurate wire delivery.
INTELLIGENT
-
Over 40 synergic programs for materials like Steel, AlMg, AlSi, CrNi, and CuSi
-
Intuitive and multilingual 3.5’’ HMI interface
-
Complete machine and synergy updates via USB stick
-
Stores up to 200 welding jobs for recurring tasks
-
Portability mode for transferring JOBS and system settings via USB
-
Weld traceability compliant with EN 3834 standards
-
Calibration mode for voltage adjustment using external accessories
-
Multi-user mode for shared machine access
-
Free online platform for customising the interface
ERGONOMIC
-
Automatic wire feeder selection via torch trigger or thumbwheel control
-
Tool-free cable connections on the rear panel for quick setup
-
Four lifting points for safe and easy transport
-
Lowered gas cylinder holder for simplified loading (up to 10 m³)
-
IP23S protection for use in demanding environments
-
Integrated storage compartment
-
Quick polarity switch on the front panel
-
LED illumination on wire feeder and spool section
-
Transparent viewing window to easily check filler wire usage
Parweld XTM 256i Inverter MIG Welder
PARWELD XTM 256i MIG WELDING INVERTER
The Parweld XTM 256i is the brand new, three phase inverter MIG welder. This Multi-process MIG Machine can also deliver Lift TIG and MMA, so you can get all your favourite processes in one system. This high-performance inverter is suitable for use with a 5kg (200mm) or 15kg (300mm) wire spool and puts out 250A of power. The XTM 256i MIG is also suitable for welding materials with ease using anywhere between 0.6 – 1.2mm MIG wire. Suitable for everyone from absolute beginners to professionals with decades of experience!FUNCTIONS
Infinite control of both volts (MIG Range: 14.5 – 26.5V) and wire feed speed allows the user to adjust parameters to achieve optimum settings for the perfect weld. LED digital display show all parameters in real time for quick, easy, and accurate adjustment of weld settings. A settings chart inside the wire feed door show quick and easy reference voltage and wire feed settings for optimal set up. Fitted with a set of quality 4 roll wire feed rollers, ensuring hassle free and smooth wire feed with even the most delicate MIG wire materials. A set of 0.8/1.0 V groove rollers comes included with the standard machine. 2T/4T control functions available. 2T is a simple press-on/lift-off button control, which keeps the current running when pressed down and cuts power when not. 4T is a system where, once the button is pressed, the arc will stay running until the button is pressed again, making it ideal for longer welding runs. An industry-standard euro torch connection allows the use of all good quality MIG torches. P1 Package supplied with the Parweld XP200A 4 metre MIG torch. Perfect for in the workshop the Parweld XTM 256i is supplied pre-built on a trolley, complete with a drawer and an integrated gas bottle shelf behind the machine. The XTM 256I supports lift TIG functionality, with a connection for a switch plug and a gas connection. Many machines with Lift TIG functionality do not have these features. Gas is often controlled via a manual gas valve on the torch which can be fiddly and waste gas! Press the trigger on the optional TIG torch to start pre flow and start the weld and finish the weld when releasing the button.WHAT IS SYNERGIC PROGRAMMING?
Parweld have designed this MIG inverter with ease-of-use in mind, and thanks to their synergic control, finding the optimal settings has never been easier. Synergic programming, as seen in the XTM 256i MIG Inverter, is a self-adjusting parameter set-up. Simply input your wire type and diameter, then select your amperage and the machine will adjust accordingly. It couldn’t be easier. Suitable for those still learning to weld or for the pros that want a simpler way of finding their optimum settings. This is the perfect beginner’s welding machine. To fine tune the settings, a voltage trim is available to dial in the weld characteristics.
KEY FEATURES
- Weld Steel, Stainless Steel, Aluminium, or flux cored gasless
- 110V / 230V single phase
- Duty cycle:
- 400V 250A @35%
- 4 roll drive wire feeder
- Infinitely adjustable voltage (14.5 – 26.5V)
- Burnback control
- Polarity switching for running gasless or solid MIG wires.
- Adjustable inductance.
- Choose between manual set up or synergic
- 2T – Hold button in to weld and release when finished
- 4T – Press and release to start, press and release to finish
- Fan on demand for quiet and energy efficient operation
- Takes 5KG or 15KG MIG wire spools
- Supplied with Parweld MIG torch (XP200A 4m)
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
TECHNICAL INFORMATION |
|
| Style | Portable |
| Machine Type | Inverter MIG/TIG/MMA |
| Voltage Range | MIG 14.5-26.5V TIG 10.4-20V MMA 20.4-30V |
| Spool Size | 300mm (15kg) 200mm (5kg) |
| Feed Box | 4 Roll |
| Wire Size | 0.6 – 1.2 mm |
| Duty Cycle | 250A @ 35% |
| Input Voltage | 400V |
| Maximum Current | 250A |
| Input Current (Eff) | MIG – 9.3A TIG – 7.9A MMA – 10.9A |
| Minimum Fuse Rating | 20A |
| KVA | 11.6 |
| Generator Size | 13 KVA |
| Enclosure Protection | IP23S |
| Dimensions (LxWxH mm) | 660 x 280 x 500 |
| Weight (kg) | 23 |
PACKAGES (Select from drop down)
SUPPLIED WITH |
|
| Machine with trolley (XTM256i) | Power source with trolley, work return lead, and gas hose |
| Machine and P1 Package (XTM256i-P1) | Power source with trolley, work return lead, gas hose, XP200A 4m long MIG torch, and gas regulator |
| Machine and P2 Package (XTM256i-P2) | Power source with trolley, work return lead, gas hose, XP200A 4m long MIG torch, PRO26 12ft TIG torch, 3m MMA electrode lead, and gas regulator |
Parweld XTM 221Di MIG Inverter 5-in-1 | MIG, TIG and Plasma | P1
Parweld XTM 221DI 5-in-1 Multi-Process MIG Inverter with AC/DC TIG, MMA and Plasma Cutting
XTM 211DI Parweld Multiprocess – MIG Torch, Argon Regulator and MMA Lead Set Package
The Parweld XTM 221DI is a 5 in 1 multi process inverter for MIG, AC/DC TIG, stick Welding and even plasma cutting! With a click of the appropriate torch switch, this clever machine quickly changes to the process required. That’s no changing of torches, polarities or gases to change process, just pull the trigger of the MIG torch for MIG welding, then pull the trigger on the plasma torch to start cutting. Need to TIG weld Ali, no problem… Just press the TIG torch button or foot control to TIG weld with HF start. You can have both Argon and Argon Mix and compressed air plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used. Great for workshop use where space may be limited. A multi language, digital display is easy to set up, with minimal knowledge required. Enter the material, type and thickness for the process being used and the machine will set itself to optimal settings which can be tweaked as required. Rather set up manually? This can also be done. MIG Torch supplied comes with an amperage control on the handle. A remote control socket on the front of the machine also allows for use of a foot control for amperage control for TIG welding.Features:
- Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past.
- Instant swapping between MIG , TIG, MMA and Stick Welding processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button.
- Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework.
- Save and recall job function settings for any desired process.
- MIG Weld, down to 0.9mm thick material
- Pulse TIG function for superior arc control
- Dual voltage 110 / 230V
- Welding Capacity 6mm (230V input)
SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 30% | |
| Generator size | 7 kVA | |
| Feed Roll | 4 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Plasma (A) | 25A (110V), 40A (230V) | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | TBC | |
| Weight (Kg) | TBC |
MULTIWELD 320T-C MIG/MAG/MMA Package
- MIG/MAG welding:
- MMA welding: basic and rutile electrodes (up to Ø 6 mm)
- Choice of trigger performance: 2T or 4T
- Welding support chart: a chart on the machine’s side helps the user adjust the tension and diameter of the filler wire according to the thickness of the material being welded.
- Display screen can be easily read, even in bright light.
- Easy to alter the settings using the machine’s simple user interface with accessible knobs and buttons suitable for gloved hands.
- Compatible reels: Ø 200 / 300 mm.
- Powerful, four-roller, motorised wire-feed rollers for efficient unwinding.
- European torch connection for quick assembly/disassembly.
- Pre-installed socket (36 V / 4.2 A) for heating gas in pure CO2 welding (heater not included).
- Compatible with US (type A) and EURO (types C/E/F) electrical sockets.
- IP 23 classification for outside use.
- Reinforced structure.
- 2 steel handles for easy manipulation.
