PROPANE FITTED HOSE 8MM
- Propane 8mm Fitted Hose: This refers to a hose specifically designed for use with propane gas. The hose has a diameter of 8mm (approximately 0.315 inches). Makers have made it typically from materials that can withstand the high pressures and temperatures associated with propane gas. The fittings on the hose are also compatible with propane gas equipment.
- 3/8″ Hose Check Valve (HCV): A hose check valve is a device that allows propane gas to flow in one direction only. This helps to prevent the backflow or reverse flow of propane gas. It can be dangerous. The check valve you mentioned has a 3/8″ diameter. It fits hoses with a 3/8″ inner diameter.
- 3/8″ Regulator Nut: A regulator nut is a threaded fitting that connects a propane regulator to a propane tank or other propane equipment. The nut has a 3/8″ diameter, which means it fits regulators with a 3/8″ inlet connection.
Together, these components could be used to connect a propane tank to a propane appliance, such as a grill or heater. The hose would be attached to the tank on one end and the appliance on the other end. With the check valve in between ensure that gas only flows in the correct direction. You can use the regulator nut to attach the regulator to the tank, allowing the user to control the pressure of the propane gas as it flows to the appliance.
- Brand: Weldgas
- Category: Gas Equipment
- Type: Fitted gas hoses
- Length (m): 5, 10, 15, 20, 30
Weldgas hoses comply with all UK standards. We can make them in other lengths if required.
Always take these precautionary measures while welding.