PNM Cutting Nozzles – General purpose Propane cutting nozzle for use with NM Cutting Torches and Type 5 Cutting Attachments
Designed with the Brass Inner Set back within the Copper Outer to Enhance Flame Stability
Cutting nozzles are precision-machined and hand-finished to give a positive seat. The orifices are swaged to minimise gas turbulence and slag accumulation, whilst the nozzle design provides excellent gas-mixing for fast pre-heating. The smoother nozzle surface reflects heat and reduces splatter accumulation. Every nozzle is inspected and flame-tested at the point of manufacture. Nozzle faces can be dressed using a fine file and the orifices cleaned using the appropriate nozzle cleaner. The flame shape and nozzle performance depend heavily on orifices having sharp, square edges. PNM Cutting Nozzles should never be bell-mouthed by using pieces of wire to clean them.
The PNM range of gas cutting nozzles are available in various sizes depending on the thickness of steel you are cutting, These PNM nozzles are a 2 piece nozzle which are used with oxygen and propane gases. Also known as Propane Nozzle Mix they have 3 machined seating faces and will fit most cutting torches on the market.
SIZES AVAILABLE.
1/8″ 190MM TO 300MM
1/16″ 10MM TO 75MM
1/32″ 3MM TO 6MM
3/32″ 90MM TO 150MM
3/64″ 5MM TO 12 MM
Check out more gas cutting and consumables
PRECAUTIONARY MEASURES IN GAS CUTTING, WELDING, AND SIMILAR PROCESSES