-15%
GYS 45 CT Dual Voltage Plasma Cutter - 110V/230V
£1,709.95 ex.VAT
Chester Top Safety Boot
Price range: £41.00 through £45.00 ex.VAT
GYS 70 CT Plasma Cutter 70A – 3 Phase
Original price was: £2,236.22.£1,899.22Current price is: £1,899.22. ex.VAT
The Cutter 70 CT has a cutting capacity of 35mm thick. It’s HF-free arcing system increases and preserves the lifetime of consumables. It has robust mechanics and a user friendly control panel, meaning it can be used in difficult environments.
Description
70 CT Plasma Cutter has a cutting capacity of 35mm thick. It’s HF-free arcing system increases and preserves the lifetime of consumables. It has robust mechanics and a user friendly control panel, meaning it can be used in difficult environments.
Key Features 70 CT Plasma Cutter
- Maximum Productivity – Faster cutting speed using oxygas
- Cuts all types of steel (mild, stainless, tempered, HLE) aluminium, copper
- High performance torch (TECMO), consumables compatible with hypertherm
- Compatible with CNC kit for automatic cutting tables
- Designed to last with reinforced metal case & non slip rubber pads
- Compact and portable3 operating modes:
- Cutting solid sheets
- Cutting wire mesh
- Trigger locking Gouging with maximum shrinkage
- Allows important metal removal (specific skid and nozzle in options)
- Premium torch TECMO® (leading supplier in Europe).
- HF-free priming avoids interference that can damage nearby electronic equipment
- It is pre-wired for use on automatic cutting tables.
- Comes with an ergonomic and high-performance 6 m manual torch
Technical Data
- Input Voltage – 400V
- Max Clean Cut – Steel: 25mm, Aluminium: 18
- Max Severance Cut – Steel: 35mm, Aluminium 25
- Duty Cycle @ 40C – 70A at 60%
- Weight – 22KG
- Warranty – 2 Years
- Package Includes – Torch and Clamp
Wide range of plasma cutters available click here to check
How to handle plasma cutters safely
Related products
Parweld XTP 103 Inverter Plasma Cutter
Parweld XTP 103 Inverter Plasma Cutter
The Parweld XTP 103 Plasma Cutter is a powerful, robust three-phase plasma inverter. A variable output is ideal for cutting metals up to 30mm thick cleanly or up to 50mm with a severance edge. Infinite power control on-board for fine-tuning to minimise dross and deliver a clean cutting edge. A clean cut edge reduces post cut clean up and increases productivity. On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this system provides easy cutting of mesh or perforated materials. Machine comes housed in a metal case equipped with a carry handle. A CNC Interface makes for easy coupling with a plasma cutting CNC table when coupled with a machine torch. Material thicknesses:- Recommended: 30mm
- Severance cut: 50mm
Compatible with Generators:
The XTP 103 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%. Requires compressor that can generate 200Lpm @5 Bar, 4.5CFM @ 75 PSI.This machine comes with:
- XTA141 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 630mm X 310mm X 540mm |
| Enclosure Protection | IP23S |
| Amperage Range | 20A – 100A |
| Starting Method | HF |
| Fuse Rating | 32A |
| Duty cycle | 100% @ 100A |
| Cut Capacity | 30mm Clean / 50mm Severance |
| Generator KVA Input | 15 |
| Weight (Kg) | 40.6 |
GYS Easycut K35 Plasma Cutter With Built in Compressor 230v
With its integrated air compressor, the EASYCUT K35 PFC can be used to cut metal wherever a single-phase
power supply is available. PFC technology allows operation between 195 V and 265 V, so you can get a highquality cut even when using 100 m extension leads. Small, light and portable, it can deliver 35 A of power to
cut different types of metal, up to 15 mm thick.
