Easycut 25 Plasma Cutter (With Built In Compresser) 240v
£760.00 ex.VAT
| Input Voltage | AC 230V – 50/60 Hz |
| Input Power (kVA) | |
| Input Current (Amps) | 16 |
| Duty Cycle @ 35% (A) | 25 |
| Cutting Capacity (Clean) | 6mm |
| Cutting Capacity (Severance) | 8mm |
| Protection/Insulation Class | IP21S |
| Dimensions (mm) | 41 x 36 x 20 |
| Weight (Kg) | 15 |
| Internal Air Compressor Noise | 60/70Db |
GYS EASYCUT K25F WITH BUILT IN AIR COMPRESSOR
Perfect for maintenance work, the GYS EasyCut K25F has a built in air compressor for plug and play functionality. More compact and cheaper long term than oxy fuel cutting, a plasma cutter with built in air compressor is less bulky too.
A pilot arc start does not require contact of the tip with the work piece. Pilot arc eliminates the requirement for a HF (high frequency) start eliminating any electro magnetic interference from mobile phones, computers, radios etc.
The GYS plasma K25F provides high quality cutting results even on painted surfaces.
Cutting capacities:
- Up to 8mm steel, stainless steel and cast iron (6mm clean cut)
- Up to 6mm aluminium and copper (4mm clean cut)
- Very accurate, the CUTTER K25F enables you to cut 0.6mm metal sheets at low intensity.
The all in one design of the plasma cutter and air compressor makes this machine ideal for mobile tasks, simply plug and play. Weighing only 15 kg, its also light weight to transport.
Other features:
GYS P400 protection – makes machine suitable for use with a generator (+/-15%) (AVR recommended
Related products
Parweld XTP 103 Inverter Plasma Cutter
Parweld XTP 103 Inverter Plasma Cutter
The Parweld XTP 103 Plasma Cutter is a powerful, robust three-phase plasma inverter. A variable output is ideal for cutting metals up to 30mm thick cleanly or up to 50mm with a severance edge. Infinite power control on-board for fine-tuning to minimise dross and deliver a clean cutting edge. A clean cut edge reduces post cut clean up and increases productivity. On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this system provides easy cutting of mesh or perforated materials. Machine comes housed in a metal case equipped with a carry handle. A CNC Interface makes for easy coupling with a plasma cutting CNC table when coupled with a machine torch. Material thicknesses:- Recommended: 30mm
- Severance cut: 50mm
Compatible with Generators:
The XTP 103 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%. Requires compressor that can generate 200Lpm @5 Bar, 4.5CFM @ 75 PSI.This machine comes with:
- XTA141 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 630mm X 310mm X 540mm |
| Enclosure Protection | IP23S |
| Amperage Range | 20A – 100A |
| Starting Method | HF |
| Fuse Rating | 32A |
| Duty cycle | 100% @ 100A |
| Cut Capacity | 30mm Clean / 50mm Severance |
| Generator KVA Input | 15 |
| Weight (Kg) | 40.6 |
