GYS 45 CT Dual Voltage Plasma Cutter – 110V/230V
£1,709.95 ex.VAT
The Cutter 45 CT offers a clean cutting capacity of 15mm thick on a multiude of materials. HF-free arcing system will preserve and increase the lifetime of consumables. Robust mechanics ensure this machine will last in difficult environments.
1 in stock
Dual Voltage Plasma Cutter
Need a plasma cutter but haven’t got access to compressed air? The GYS CUTTER 25K & CUTTER 35KF have got you covered. Running off a 230v input supply with the addition of a built-in compressor -these machines are extremely handy for when compressed air is not readily available.
The small but powerful Dual Voltage Plasma Cutter is our bestselling 230v plasma, with an impressive 40 amps of cutting power on a single phase supply this machine will clean cut up to 15mm & provide a severance cut of 20mm!
- Cuts all types of steel (mild, stainless, tempered, HLE), as well as aluminium, copper etc
- Faster cutting speed with oxygas
- Consumables set up is easy for maxiumum productivity
- Includes flexible voltage hose which accepts very long network connections
- PFC technology – the electrical network is better exploited and allows an energy saving of 30%
- Package includes leads and 4M disconnective torch (TPT 40) with an easy to use trigger mechanism
Technical Data
- Input Voltage – 110/230V
- Amperage – 110V – 32A : 230v – 16A
- Amp Range – 110V – 15-30A : 230V – 15-45A
- Max Clean Cut – 110V – 10mm (Steel) 8mm (Aluminium) : 230V – 15mm (Steel) 10mm (Aluminium)
- Max Severance Cut – 110V – 15mm (Steel) 10mm (Aluminium) 230V – 20mm (Steel) 15mm (Aluminium)
- Duty Cycle @ 40C – 110v – 21A @ 60%, 230V – 41A @ 60%
- Weight – 15KG
- Warranty – 2 Years
Related products
Parweld XTP 103 Inverter Plasma Cutter
Parweld XTP 103 Inverter Plasma Cutter
The Parweld XTP 103 Plasma Cutter is a powerful, robust three-phase plasma inverter. A variable output is ideal for cutting metals up to 30mm thick cleanly or up to 50mm with a severance edge. Infinite power control on-board for fine-tuning to minimise dross and deliver a clean cutting edge. A clean cut edge reduces post cut clean up and increases productivity. On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this system provides easy cutting of mesh or perforated materials. Machine comes housed in a metal case equipped with a carry handle. A CNC Interface makes for easy coupling with a plasma cutting CNC table when coupled with a machine torch. Material thicknesses:- Recommended: 30mm
- Severance cut: 50mm
Compatible with Generators:
The XTP 103 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%. Requires compressor that can generate 200Lpm @5 Bar, 4.5CFM @ 75 PSI.This machine comes with:
- XTA141 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 630mm X 310mm X 540mm |
| Enclosure Protection | IP23S |
| Amperage Range | 20A – 100A |
| Starting Method | HF |
| Fuse Rating | 32A |
| Duty cycle | 100% @ 100A |
| Cut Capacity | 30mm Clean / 50mm Severance |
| Generator KVA Input | 15 |
| Weight (Kg) | 40.6 |
