Parweld XTP 40 Dual Voltage Inverter Plasma Cutter
£820.00 ex.VAT
GYS 45 CT Dual Voltage Plasma Cutter - 110V/230V
£1,709.95 ex.VAT
Parweld XTP 63 Plasma Cutter
£930.00 ex.VAT
The XTP 63 offers a 20MM clean cut of steel & a 30MM severance cut
Description
XTP 63 Plasma Cutter
Variable Output The variable output of the XTP 63 makes it ideal for cutting metals up to 20mm thick. The pilot arc automatically re-ignites enabling easy cutting of mesh or perforated materials. Non HF ignition minimises the risk of interference with electronic systems. Generator Friendly The XTP 63 is able to cope with inputs that fluctuate by +/-15% & can be used with the majority of generators. The machine has a metal case with a carrying handle.
Features of XTP 63 Plasma Cutter
- Clean Cut – The XTP 63 offers a 20MM clean cut of steel & a 30MM severance cut.
- Variable Output – The XTP 63 boasts the ability to fine tune amperage to minimise dross on cut edges.
- Generator Friendly – The XTP 63 is able to cope with inputs which fluctuate by +/- 10% & can be used with the majority of generators.
- 3 Year Return To Base Warranty – “No Quibbles” warranty policy. Should something go wrong, Parweld will collect the machine, repair it & return it free of charge.
- Pilot Arc – Pilot arc automatically re-ignites enabling easy cutting of mesh or perforated materials. Non high frequency ignition minimizes the risk of interference with electronic systems.
- Auto over voltage & over current protection.
- Built in air pressure regulator.
Technical Specifications
- Input Supply – 400V 3 Phase
- Amperage Range – 10A – 60A
- Duty Cycle – 40% @ 60A
- Cut Capacity – 20MM Clean / 30MM Severance
- Generator KVA Input – 3.2KVA
- Weight – 13KG
- Dimensions – 430MM X 170MM X 270MM
- Enclosure Protection – IP23S
Related products
Parweld XTP 103 Inverter Plasma Cutter
Parweld XTP 103 Inverter Plasma Cutter
The Parweld XTP 103 Plasma Cutter is a powerful, robust three-phase plasma inverter. A variable output is ideal for cutting metals up to 30mm thick cleanly or up to 50mm with a severance edge. Infinite power control on-board for fine-tuning to minimise dross and deliver a clean cutting edge. A clean cut edge reduces post cut clean up and increases productivity. On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this system provides easy cutting of mesh or perforated materials. Machine comes housed in a metal case equipped with a carry handle. A CNC Interface makes for easy coupling with a plasma cutting CNC table when coupled with a machine torch. Material thicknesses:- Recommended: 30mm
- Severance cut: 50mm
Compatible with Generators:
The XTP 103 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%. Requires compressor that can generate 200Lpm @5 Bar, 4.5CFM @ 75 PSI.This machine comes with:
- XTA141 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 630mm X 310mm X 540mm |
| Enclosure Protection | IP23S |
| Amperage Range | 20A – 100A |
| Starting Method | HF |
| Fuse Rating | 32A |
| Duty cycle | 100% @ 100A |
| Cut Capacity | 30mm Clean / 50mm Severance |
| Generator KVA Input | 15 |
| Weight (Kg) | 40.6 |
GYS Easycut K35 Plasma Cutter With Built in Compressor 230v
With its integrated air compressor, the EASYCUT K35 PFC can be used to cut metal wherever a single-phase
power supply is available. PFC technology allows operation between 195 V and 265 V, so you can get a highquality cut even when using 100 m extension leads. Small, light and portable, it can deliver 35 A of power to
cut different types of metal, up to 15 mm thick.
