Lincoln Tomahawk 30k (230V) Plasma Cutter
£1,350.00 ex.VAT
5 in stock
Lincoln Tomahawk 30k
Flash Sale for 1 week only…
Lincoln Tomahawk 30k
New to Market.
DETAILS
The portable, flexible cutting power of up to 16 mm, powered from a standard 230V input supply, ideal for work on site.
Features
Ultimate Portability – Internal air compressor enables operation in environments where external compressed air is unavailable.
Continuous Output Control – Focus the arc for different material thickness
Touch Start system – Reliable plasma arc initiation without high frequency
Rapid Arc Restrike – Fast cutting through gaps, even expanded metal.
Front Panel Purge Control – Makes it easy to set the air flow rate without initiating the plasma arc.
Cool Operation, Long Consumable Life – New electrode and nozzle design save you money in the long run
Added Safety – Our Parts-in-Place system detects correct installation of consumables and torch.
Engine Drive Compatible – Select a Lincoln Electric Outback® or Vantage® to power your Tomahawk® in remote locations
What’s Included in lincoln Tomahawk 30k
- Internal air compressor (external air connection also standard)
- LC30 Torch with 4 m cable
- Air regulator and pressure gauge
- Internal water separator
- Work clamp and cable
- Spare consumables
- Shoulder strap
- Input power cord
Disclaimers
Warning – Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Check out more products here
Related products
Parweld XTP 103 Inverter Plasma Cutter
Parweld XTP 103 Inverter Plasma Cutter
The Parweld XTP 103 Plasma Cutter is a powerful, robust three-phase plasma inverter. A variable output is ideal for cutting metals up to 30mm thick cleanly or up to 50mm with a severance edge. Infinite power control on-board for fine-tuning to minimise dross and deliver a clean cutting edge. A clean cut edge reduces post cut clean up and increases productivity. On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this system provides easy cutting of mesh or perforated materials. Machine comes housed in a metal case equipped with a carry handle. A CNC Interface makes for easy coupling with a plasma cutting CNC table when coupled with a machine torch. Material thicknesses:- Recommended: 30mm
- Severance cut: 50mm
Compatible with Generators:
The XTP 103 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%. Requires compressor that can generate 200Lpm @5 Bar, 4.5CFM @ 75 PSI.This machine comes with:
- XTA141 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 630mm X 310mm X 540mm |
| Enclosure Protection | IP23S |
| Amperage Range | 20A – 100A |
| Starting Method | HF |
| Fuse Rating | 32A |
| Duty cycle | 100% @ 100A |
| Cut Capacity | 30mm Clean / 50mm Severance |
| Generator KVA Input | 15 |
| Weight (Kg) | 40.6 |
