Hot
Parweld XTM 201DI Multi Process MIG Welder Package
£1,072.00 ex.VAT
Parweld XTM 255i Inverter MIG Welder
£889.00 ex.VAT
Parweld XTM 221Di MIG Inverter 5-in-1 | MIG, TIG and Plasma | P2
£2,195.00 ex.VAT
Features:
- Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past.
- Instant swapping between MIG , TIG, MMA and Stick Welding processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button.
- Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework.
- Save and recall job function settings for any desired process.
- MIG Weld, down to 0.9mm thick material
- Pulse TIG function for superior arc control
- Dual voltage 110 / 230V
- Welding Capacity 6mm (230V input)
Superior arc control thanks to Pulse TIG function, for optimal heat control to ensure you don’t burn through your workpiece whilst welding it. Comes with HF (High Frequency) Start TIG ignition.
Synergic programming makes working out your weld settings easier than ever – by simply inputting the material and thickness of your desired workpiece, the inbuilt programming automatically calculates the optimum settings for you. Alternatively, for fine-tuning and to suit the more experienced welder, a manual setting selection mode is also available.
Connect to your smartphone via Bluetooth for modern control and parameter settings.
Machine comes with MMA lead set, 3m MIG Torch with Amperage Control, 12.5ft TIG Torch with Amperage Control, Argon Regulator, input cable and three gas hoses as standard.
Description
XTM 211DI Parweld Multiprocess – TIG Torch, MIG Torch and MMA Lead Set Package
The Parweld XTM 221DI is a 5 in 1 multi process inverter for MIG, AC/DC TIG, stick Welding and even plasma cutting! With a click of the appropriate torch switch, this clever machine quickly changes to the process required. That’s no changing of torches, polarities or gases to change process, just pull the trigger of the MIG torch for MIG welding, then pull the trigger on the plasma torch to start cutting. Need to TIG weld Ali, no problem… Just press the TIG torch button or foot control to TIG weld with HF start. You can have both Argon and Argon Mix and compressed air plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.
Great for workshop use where space may be limited.
A multi language, digital display is easy to set up, with minimal knowledge required. Enter the material, type and thickness for the process being used and the machine will set itself to optimal settings which can be tweaked as required. Rather set up manually? This can also be done.
Both MIG and TIG Torches supplied come with amperage controls on the handle. A remote control socket on the front of the machine also allows for use of a foot control for amperage control for TIG welding.
Related products
Parweld XTE 201C MIG Welder
It has a DC output and when combined with the correct type of wire it is suitable for welding steels. The feed box ensures reliable feeding of 0.6mm and 1.0mm wires. The XTE 201C has a full sized cabinet which can accept a gas cylinder and its large wheels mean it is easily portable and can be moved from job to job.
Parweld XTS 163 Dual Voltage MMA Welder
PARWELD XTS 163 DUAL VOLTAGE MMA INVERTER WELDER
The Parweld XTS 163 DV stick welder is ideal for site work. A 110V stick welder, also capable of running from 230V for maximum flexibility. Its small size and light weight make it perfect for mobile applications where the machine can be kept in a van etc. Similarly, these units are equally suitable for home use. Arc force and hot start technology makes striking and re striking electrodes easy. Hot start increases current during arc initiation to get the weld started, whilst arc force kicks in if the arc distance becomes too short helping to stop the electrode sticking during the weld. The Parweld XTS 163 DV is generator friendly too, capable of coping with power inputs with a fluctuation tolerance of ± 15%. Weld electrodes up to 3.2mm in size with ease. Lift start TIG welding can also be done with the XTS 163 dual voltage using a basic TIG torch with manual gas valve – see related products. Using a suitable gas supply TIG welding of steel and stainless steel is possible (40A minimum). Lift start TIG limits the arc current when the tungsten touches the work piece preventing electrode damage. Simply touch the work piece to get the arc started and then lift slightly before welding.KEY FEATURES
- 230V single phase
- 160A @ 25% duty cycle (230V)
- 35-50 panel socket connections
- Supplied with 3m electrode holder lead and 3m earth lead with clamp.
- Weld up to 4mm steel
- Lightweight – just 4.8kg
- Digital amperage display
- Over voltage and over current protection
- Built in electrode anti sticking
- 50V no load voltage
- 3 year return to base warranty
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
Machine and lead set package:
SUPPLIED WITH: Power source with 2m electrode holder lead, 3m earth return lead with clamp, 3m mains input lead, operating instructionsMachine, torch and regulator package:
SUPPLIED WITH: Power source with 2m electrode holder lead, 3m earth return lead with clamp, 3m mains input lead, operating instructions, WP17V TIG torch, SS2G Argon RegulatorSPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Max electrode size | Enclosure protection | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V 110V | 16A 32A | 5 – 160A 5 – 140A | 3.2mm | IP23S | 160A @ 25% (230V) | 285 x 120 x 250 mm / 4.8kg | 6kVA |
Parweld XTT 353P AC/DC Pulsed TIG Welder
PARWELD XTT 353P AC/DC PULSED TIG WELDER
The Parweld XTT 353P AC/DC is a 3 phase TIG welding inverter with full TIG welding parameter adjustment. Square wave AC output and power pulsing maximises productivity whilst allowing the user to fine tune heat output. The XTT 353 P AC/DC is an industrial machine and is generator friendly, coping with ±15% voltage fluctuations. In TIG mode the Parweld XTT 353P can weld materials up to 9mm in thickness. The XTT can also be used in MMA mode. The XTT 353 air cooled package supplied with a Parweld PRO Grip 26 torch with ergonomic handle for increased welder comfort. A knuckle joint improves cable flexibility and increased dexterity. Water cooled package supplied with a Parweld PRO Grip 18 water cooled torch also with ergonomic handle.TIG WELDING
A high frequency start circuit makes for easy and uncontaminated arc starting, increasing Tungsten electrode life. Trigger latching allows the user to release the trigger during long welds to improve comfort. Simple adjustability. Buttons to select between MMA and TIG modes, AC or DC as well as selecting 2T, 4T, HF start or lift TIG. 2 Arrow buttons allow the user to scroll through pre flow, start current, up slope, main current, background current, pulse frequency, pulse balance, down slope, final current and post flow. Once the LED indicates the parameter to set, simply turn the middle dial to change settings. (See product video tab above for demonstration – video shows the single phase XTT 202P but controls remain the same)KEY FEATURES
- 400V input
- 350A @ 50% duty cycle
- Square wave AC TIG mode
- Variable pulse frequency
- Variable AC frequency
- HF Arc starting
- Digital control
- Optional foot control
- Ergonomic and flexible 3 button TIG torch – on/off button and up/down amperage controls.
- Generator friendly
- Hot start function in MMA mode. The machine increases initial voltage to start the arc and then reduces once arc initiated.
- Adjustable pre and post flow gas, start and end currents as well as pulse frequency and balance
- Industrial 3550 panel socket connectors
- 3 year full warranty (return to base)
- Optional additional 3 year warranty service plan
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Slope Functions | Pre/Post flow functions | Pulse rating | AC frequency | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 400V | 16A | 5 – 350A DC 10 – 350 AC | 0 – 10s | 0 – 10s | 0.5 – 200Hz | 50 – 250Hz | 350A @ 50% | 606 x 315 x 540 mm / 38kg | 13kVA |
Parweld XTT 202P AC/DC Pulsed TIG Welder
PARWELD XTT 202 AC/DC PULSED TIG WELDER
The Parweld XTT 202 AC/DC is a single phase AC/DC TIG welder. AC or DC current functions allow the user to TIG or MMA weld virtually any metal up to around 6mm. Square wave AC output and power pulsing maximises productivity whilst allowing the user to fine tune heat output. A lightweight and small size unit, the XTT 202P AC/DC can be used at home or in the workshop. Furthermore, these versatile little TIG welders are generator friendly, coping with ±15% voltage fluctuations. In TIG mode the Parweld XTT 202 can weld materials up to 6mm in thickness. In MMA mode, electrodes up to 4.8mm can be used with ease. Supplied with a Parweld PRO Grip 26 torch with ergonomic handle for increased welder comfort. A knuckle joint improves cable flexibility and increased dexterity.TIG WELDING
A high frequency start circuit makes for easy and uncontaminated arc starting, increasing Tungsten electrode life. Trigger latching allows the user to release the trigger during long welds to improve comfort. Simple adjustability.- Buttons to select between MMA and TIG modes, AC or DC as well as selecting 2T, 4T, HF start or lift TIG.
- 2 Arrow buttons allow the user to scroll through pre flow, start current, up slope, main current, background current, pulse frequency, pulse balance, down slope, final current and post flow. Once the LED indicates the parameter to set, simply turn the middle dial to change settings. (See product video tab above for demonstration)
KEY FEATURES
- 230V input
- 200A @ 25% duty cycle
- Square wave AC TIG mode
- Variable pulse frequency
- Variable AC frequency
- HF Arc starting
- Digital control
- Optional foot control
- Ergonomic and flexible 3 button TIG torch – on/off button and up/down amperage controls.
- Generator friendly
- Hot start function in MMA mode. The machine increases initial voltage to start the arc and then reduces once arc initiated.
- Adjustable pre and post flow gas, start and end currents as well as pulse frequency and balance
- Industrial 3550 panel socket connectors
- Sturdy metal case and carry handle and shoulder strap
- 3 year full warranty (return to base)
- Optional additional 3 year warranty service plan
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Slope Functions | Pre/Post flow functions | Pulse frequency | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 5 – 200A DC 10 – 200 AC | 0 – 10s | 0 – 10s | 250Hz | 200A @ 25% | 480 x 240 x 400 mm / 22kg | 5kVA |
Mig Welders
Tig Welder
Stick/MMA Welding Machines
GYS Plasma Consumables
Welder Generators
Sprays/Lubricants & Cutting Fluids
Welding Helmets
Helmet Consumables
AIR-FED HELMETS
Student Products & Bundles