Hot
Parweld XTM 201DI Multi Process MIG Welder Package
£1,072.00 ex.VAT
Parweld XTM 255i Inverter MIG Welder
£889.00 ex.VAT
Parweld XTM 221Di MIG Inverter 5-in-1 | MIG, TIG and Plasma | P2
£2,195.00 ex.VAT
Features:
- Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past.
- Instant swapping between MIG , TIG, MMA and Stick Welding processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button.
- Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework.
- Save and recall job function settings for any desired process.
- MIG Weld, down to 0.9mm thick material
- Pulse TIG function for superior arc control
- Dual voltage 110 / 230V
- Welding Capacity 6mm (230V input)
Superior arc control thanks to Pulse TIG function, for optimal heat control to ensure you don’t burn through your workpiece whilst welding it. Comes with HF (High Frequency) Start TIG ignition.
Synergic programming makes working out your weld settings easier than ever – by simply inputting the material and thickness of your desired workpiece, the inbuilt programming automatically calculates the optimum settings for you. Alternatively, for fine-tuning and to suit the more experienced welder, a manual setting selection mode is also available.
Connect to your smartphone via Bluetooth for modern control and parameter settings.
Machine comes with MMA lead set, 3m MIG Torch with Amperage Control, 12.5ft TIG Torch with Amperage Control, Argon Regulator, input cable and three gas hoses as standard.
Description
XTM 211DI Parweld Multiprocess – TIG Torch, MIG Torch and MMA Lead Set Package
The Parweld XTM 221DI is a 5 in 1 multi process inverter for MIG, AC/DC TIG, stick Welding and even plasma cutting! With a click of the appropriate torch switch, this clever machine quickly changes to the process required. That’s no changing of torches, polarities or gases to change process, just pull the trigger of the MIG torch for MIG welding, then pull the trigger on the plasma torch to start cutting. Need to TIG weld Ali, no problem… Just press the TIG torch button or foot control to TIG weld with HF start. You can have both Argon and Argon Mix and compressed air plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.
Great for workshop use where space may be limited.
A multi language, digital display is easy to set up, with minimal knowledge required. Enter the material, type and thickness for the process being used and the machine will set itself to optimal settings which can be tweaked as required. Rather set up manually? This can also be done.
Both MIG and TIG Torches supplied come with amperage controls on the handle. A remote control socket on the front of the machine also allows for use of a foot control for amperage control for TIG welding.
Related products
Parweld XTM 201DI Multi Process MIG Welder Package
KEY FEATURES
- Weld Steel, Stainless Steel or Aluminium
- 110 or 230V single phase (Smart switching)
- 200A @ 25% duty cycle
- 2 roll drive wire feeder
- Use gas with solid MIG wire or reverse polarity and use gas less, self shielding MIG wire
- Infinitely adjustable voltage (14.5 – 24V MIG) (10.4 – 18V TIG) (20.4 – 28V MMA)
- Infinitely variable wire feed speed (3.5 – 21m/min)
- Adjustable burnback control
- Variable inductance
- Overload warning indicator
- Built in gas valve for MIG and TIG processes
- Use 1kg or 5kg MIG wire spools
- Supplied with Parweld MIG torch – Integrated Knuckle Joint Systems allowing movements of the handle and neck independently from the cable assembly
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
- Current Range: 30 – 200A
- Single Phase 110/230V
- Weight: 17.5 Kg
- FREE 24HR DELIVERY
Parweld XTM 161i MIG Welder
PARWELD XTM 161i MIG WELDING INVERTER
Parweld’s smallest inverter MIG welder, the Parweld XTM 161i is suitable for use with both gas using solid wire or with gasless flux cored MIG wire. Welds materials up to 4mm with ease using either 0.6 or 0.8mm MIG wire. Synergic control of both volts and wire feed speed allows the user to infinitely adjust parameters to achieve optimum settings for the perfect weld. Digital displays show volts and wire feed speed, changing to amperage during the weld. A quality 2 roll wire feed ensures hassle free and smooth wire feed. A guide roller is included with the machine with grooves for both 0.6 and 0.8mm wires, easily changeable by removing and turning the roller. An industry standard euro torch connection allows the use of all good quality MIG torches. Supplied with the Parweld Eco-grip Max 150A MIG torch, taking industry standard Binzel style spares available from any welding supplier. Perfect for in the workshop or for mobile use, the Parweld XTM range of machines are lightweight and housed in rugged cases for durability.KEY FEATURES
- Weld Steel, Stainless Steel or Aluminium (up to 4mm thickness)
- 230V single phase
- 160A @ 40% duty cycle
- 2 roll drive wire feeder
- Use gas with solid MIG wire or reverse polarity and use gas less, self shielding MIG wire
- Infinitely adjustable voltage (13.5 – 22V)
- Infinitely variable wire feed speed (2 – 15mm/min)
- Adjustable burnback control
- Variable inductance
- Overload warning indicator
- Built in gas valve
- Use 5kg MIG wire spools
- Supplied with Parweld MIG torch – Integrated Knuckle Joint Systems allowing movements of the handle and neck independently from the cable assembly
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Max current | Wire size | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 160A | 0.6 – 0.8mm | 160A @ 40% | 469 x 223 x 421 mm / 15.5kg | 5 kVA |
Parweld XTE 181C MIG Welder
PARWELD XTE 181C MIG WELDER
Ideal for light automotive and hobbyist use, the Parweld XTE 181C is a step regulated transformer machine with fan cooling. The XTE 181C is suitable for welding of Steel, Stainless Steel and Aluminium from 0.75 to 5mm when using the appropriate MIG welding wire. An incorporated wire feed of metal construction with a quality motor with 2 roll drive provides reliable wire feeding. Suitable for either 0.6 or 0.8mm MIG wire in 5 or 15kg spools. 8 step voltage selection and infinitely variable wire feed speed allows fine tuning of welding parameters. Industry standard euro torch connection allows the use of all good quality MIG torches. Supplied with the quality Parweld Eco-grip Max 150A MIG torch, taking industry standard Binzel style spares available from any welding supplier. Perfect for in the workshop, the Parweld XTE 181 machines are supplied on wheels and casters for maneuverability. A solid rear wheel axle further demonstrates the machines rugged build quality. A carriage at the rear of the machine securely holds half size (20L) gas cylinders.KEY FEATURES
- Weld Steel, Stainless Steel or Aluminium (0.75 – 5mm thickness)
- 230V single phase
- 185A @ 15% duty cycle
- 2 roll drive wire feeder
- Use gas with solid MIG wire or reverse polarity and use gas less, self shielding MIG wire
- Forced fan air cooling
- 8 voltage step adjustment
- Infinitely variable wire feed speed
- Overload warning indicator
- Built in gas valve
- Use 5kg or 15kg MIG wire spools
- Supplied with Parweld MIG torch – Integrated Knuckle Joint Systems allowing movements of the handle and neck independently from the cable assembly
- 2 year return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Voltage steps | Wire size | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 35 – 185A | 8 | 0.6 – 0.8mm | 165A @15% 90A @ 60% | 705 x 420 x 630 mm / 40.8kg | 12kVA |
Parweld XTM 211Di MIG Inverter 4-in-1 | Dual Voltage
Parweld XTM 211DI 4-in-1 Multi-Process MIG Inverter with AC/DC TIG & MMA
XTM 211DI Parweld Multiprocess – P2 Package Machine, TIG Torch and MIG Torch Package
The Parweld XTM211Di is a 4-in-1 multi-process MIG inverter that also carries the capabilities for DC TIG, AC TIG and MMA, all in one machine. High quality build and excellent functionality for outstanding welding characteristics on every weld. The XTM211 DI is unique from other multi-mode MIG machines in that it comes equipped with capabilities for AC/DC TIG. This machine is also set up for hosting both a MIG and TIG torch at the same time, as well as quick switching between TIG and MIG, for swift and easy use. To switch to MIG from TIG, simply put down the TIG torch, pick up the MIG one and press the trigger. The XTM 211 will detect the change in torches and automatically switch over to the correct function for you. Vice versa is also true of the MIG to TIG torches. This functionality also extends to the gases too. You can have both Argon and Argon Mix plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.Features:
Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past. Instant swapping between MIG and TIG processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button. Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework. Save and recall up to 9 job function settings for any desired process.
Superior arc control thanks to Pulse TIG function, for optimal heat control to ensure you don’t burn through your workpiece whilst welding it. Comes with HF (High Frequency) Start TIG ignition.
Synergic programming makes working out your weld settings easier than ever – by simply inputting the material and thickness of your desired workpiece, the inbuilt programming automatically calculates the optimum settings for you. Alternatively, for fine-tuning and to suit the more experienced welder, a manual setting selection mode is also available.
Connect to your smartphone via Bluetooth for modern control and parameter settings.
Machine comes with MMA lead set, 3m MIG Torch with Amperage Control, 12.5ft TIG Torch with Amperage Control, input cable and two gas hoses as standard.
SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 25% | |
| Generator size | 7 kVA | |
| Feed Roll | 2 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Style | Portable | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | 615 x 275 x 495 | |
| Weight (Kg) | 27.8 |
Parweld XTT 353P AC/DC Pulsed TIG Welder
PARWELD XTT 353P AC/DC PULSED TIG WELDER
The Parweld XTT 353P AC/DC is a 3 phase TIG welding inverter with full TIG welding parameter adjustment. Square wave AC output and power pulsing maximises productivity whilst allowing the user to fine tune heat output. The XTT 353 P AC/DC is an industrial machine and is generator friendly, coping with ±15% voltage fluctuations. In TIG mode the Parweld XTT 353P can weld materials up to 9mm in thickness. The XTT can also be used in MMA mode. The XTT 353 air cooled package supplied with a Parweld PRO Grip 26 torch with ergonomic handle for increased welder comfort. A knuckle joint improves cable flexibility and increased dexterity. Water cooled package supplied with a Parweld PRO Grip 18 water cooled torch also with ergonomic handle.TIG WELDING
A high frequency start circuit makes for easy and uncontaminated arc starting, increasing Tungsten electrode life. Trigger latching allows the user to release the trigger during long welds to improve comfort. Simple adjustability. Buttons to select between MMA and TIG modes, AC or DC as well as selecting 2T, 4T, HF start or lift TIG. 2 Arrow buttons allow the user to scroll through pre flow, start current, up slope, main current, background current, pulse frequency, pulse balance, down slope, final current and post flow. Once the LED indicates the parameter to set, simply turn the middle dial to change settings. (See product video tab above for demonstration – video shows the single phase XTT 202P but controls remain the same)KEY FEATURES
- 400V input
- 350A @ 50% duty cycle
- Square wave AC TIG mode
- Variable pulse frequency
- Variable AC frequency
- HF Arc starting
- Digital control
- Optional foot control
- Ergonomic and flexible 3 button TIG torch – on/off button and up/down amperage controls.
- Generator friendly
- Hot start function in MMA mode. The machine increases initial voltage to start the arc and then reduces once arc initiated.
- Adjustable pre and post flow gas, start and end currents as well as pulse frequency and balance
- Industrial 3550 panel socket connectors
- 3 year full warranty (return to base)
- Optional additional 3 year warranty service plan
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Slope Functions | Pre/Post flow functions | Pulse rating | AC frequency | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 400V | 16A | 5 – 350A DC 10 – 350 AC | 0 – 10s | 0 – 10s | 0.5 – 200Hz | 50 – 250Hz | 350A @ 50% | 606 x 315 x 540 mm / 38kg | 13kVA |
Mig Welders
Tig Welder
Stick/MMA Welding Machines
GYS Plasma Consumables
Welder Generators
Sprays/Lubricants & Cutting Fluids
Welding Helmets
Helmet Consumables
AIR-FED HELMETS
Student Products & Bundles