Electrode holder 200A
£13.03 ex.VAT
GYS Easy MIG 160 MIG Welder
£475.63 ex.VAT
The Easy MIG range of welders from GYS are compact, light & maneuverable multi process welders.
| Weight | 15 kg |
|---|
1 in stock (can be backordered)
Description
Features of 160 MIG Welder:
- Easy to adjust – Simply use the voltage (15-22V) and wire feed speed (3-10 MTR / Min) knobs to adjust your welding parameters. There is even a chart on the machine which helps out with what should go where depending on the thickness of the material you’re welding!
- Euro Connection – The majority of the Easy MIG range offers a euro connecting torch which makes for easy serviceability and replacement of the torch.
- 1KG (100MM) & 5KG (200MM) wire reel capacity
- Digital Display – The digital display on the Easy MIG 160 shows your voltage and current
- Manually adjustable arc dynamic
- Multi Process – Not just a MIG machine! The Easy MIG range offers MIG, MAG, MMA & Scratch TIG process’
- MMA – The Easy MIG 160 can run up to a 3.2MM electrode which allows for welding of around 10MM steel!
Torch:
GYS’ Easy MIG range are supplied with Trafimet MIG torches & MMA Leads. They don’t scrimp on the accessories!
The GYS Easy MIG 160 comes with an MB15 which is 2.2 Meters in length. This is upgradeable if need be, just talk to one of our sales advisors!
Technical Specifications of Easy MIG 160 MIG welder:
- Input Supply (Voltage & Amps) – 240V 16A
- Amp Range – 30A – 160A
- Duty Cycle – 20% @ 160A / 40C
- Generator Friendly (kVA) – Yes / 8kVA
- Wire Feed – 2 Roll
- Weldable Materials – Mild Steel & Stainless Steel
- Weight & Dimensions – 10.1KG / 400MM X 200MM X 330MM
- Voltage Steps – None Stepped / Adjustable between 15V-22V
- Wire Reel Capacity – 1KG (100MM) & 5KG (200MM)
Welding is a diverse field and requires various welding products and accessories. Many types of welding machines exist such as MIG, TIG and Stick. However, while using these welding machines, always take necessary precautions!
How to use guide on 160 MIG welder:
Here is a complete guide on using GYS Easy MIG 160 MIG Welder:
- Using a 160 MIG welder involves several key steps to ensure safety and effectiveness. First, familiarize yourself with the welder by reading the manual to understand its features and safety precautions.
- Always wear appropriate safety gear, including a welding helmet, gloves, a long-sleeve shirt, and safety boots.
- To set up the welder, connect it to a suitable power source and attach the gas cylinder, typically an Argon/CO2 mix, setting the flow rate to 20-25 CFH.
- Install the wire spool and thread the wire through the drive roll into the welding gun.
- Adjust the welder’s settings by setting the voltage and wire feed speed according to the thickness of the material you’re welding and ensuring the polarity is set to DCEP (Direct Current Electrode Positive).
- Prepare the workpiece by cleaning it to remove any rust, paint, or contaminants and securing it with clamps.
- Attach the ground clamp to a clean, unpainted part of the workpiece to ensure a good electrical connection. When welding, hold the gun at a 10-15 degree angle close to the joint and pull the trigger to start the arc, moving the gun steadily along the joint to create a smooth, even weld bead.
- After welding, release the trigger to stop the wire feed and arc, allowing the weld to cool naturally before inspecting it for quality.
- Finally, turn off the welder and close the gas cylinder valve, storing all equipment safely.
- Regular maintenance is important; clean the welding gun nozzle and check for wear on consumables and gas hoses to ensure the welder remains in good working condition.
Related products
Lincoln Bester 190C Multi MIG TIG MMA Welding Machine
Please be advised this machine takes 5KG wire not 15kg
Lincoln Electric presents the Bester 190C Multi Process Inverter Welder. This 180A compact inverter based welding machine is an excellent option for MIG/ TIG Lift and MMA applications. Designed to be portable everywhere you go within your workshops and working environments
Packed Dimensions: Height 34cm x Width 26cm x Depth 56cm
Gross Weight: 17kg each
MULTIWELD FV 220M-C
The MULTIWELD 220M-C is a compact single-phase welding machine, combining MIG/MAG, cored wire and MMA welding
processes. It operates on a supply voltage between 85 and 265 V thanks to its FV (Flexible Voltage) power supply. Equipped
with an accurate 4-roller wire feeder system and a reinforced structure with 2 handles for lifting and slinging, it is ideal for
welding in the workshop and for quick troubleshooting on site.
Parweld XTM 161i MIG Welder
PARWELD XTM 161i MIG WELDING INVERTER
Parweld’s smallest inverter MIG welder, the Parweld XTM 161i is suitable for use with both gas using solid wire or with gasless flux cored MIG wire. Welds materials up to 4mm with ease using either 0.6 or 0.8mm MIG wire. Synergic control of both volts and wire feed speed allows the user to infinitely adjust parameters to achieve optimum settings for the perfect weld. Digital displays show volts and wire feed speed, changing to amperage during the weld. A quality 2 roll wire feed ensures hassle free and smooth wire feed. A guide roller is included with the machine with grooves for both 0.6 and 0.8mm wires, easily changeable by removing and turning the roller. An industry standard euro torch connection allows the use of all good quality MIG torches. Supplied with the Parweld Eco-grip Max 150A MIG torch, taking industry standard Binzel style spares available from any welding supplier. Perfect for in the workshop or for mobile use, the Parweld XTM range of machines are lightweight and housed in rugged cases for durability.KEY FEATURES
- Weld Steel, Stainless Steel or Aluminium (up to 4mm thickness)
- 230V single phase
- 160A @ 40% duty cycle
- 2 roll drive wire feeder
- Use gas with solid MIG wire or reverse polarity and use gas less, self shielding MIG wire
- Infinitely adjustable voltage (13.5 – 22V)
- Infinitely variable wire feed speed (2 – 15mm/min)
- Adjustable burnback control
- Variable inductance
- Overload warning indicator
- Built in gas valve
- Use 5kg MIG wire spools
- Supplied with Parweld MIG torch – Integrated Knuckle Joint Systems allowing movements of the handle and neck independently from the cable assembly
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Max current | Wire size | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 160A | 0.6 – 0.8mm | 160A @ 40% | 469 x 223 x 421 mm / 15.5kg | 5 kVA |
GYS NOMADFEED 425-4
Optimum MIG/MAG settings
- Electronically controlled wire speed adjustable using the potentiometer at the front of the machine.
- Choice of 2 torch trigger modes : 2T or 4T.
- Wire speed regulation modes : CC (current source) or CV (voltage source).
- Soft start function : easier first contact with the metal.
- Precise wire pressure adjustment.
- Choice of information displayed on screen.
- Heavy duty cycle for enhanced productivity (425A @ 60%).
- Compatible with air cooled torches and water cooled torches connected to an external cooling unit.
- Powerful electronically regulated wire feed motor (100W).
- The 4 drive rolls ensure a smooth feed on all types of wire.
- Display of current/voltage/wire speed (for DMOS).
- Display screen is readable even in very bright situation.
- Straightforward interface with buttons designed to be operated while wearing gloves.
- EURO torch connection.
- Easy wire feed.
- Quick torch air purge.
- Electronics protected from water and dust.
- IP 23 protection rated for outside use.
- Filtered gas connection to prevent impurities from entering the circuit.
- Complete range of connection cables (optional).
- Fitted with a handle for better portability
Parweld XTM 201i MIG Welder
PARWELD XTM 201i MIG WELDING INVERTER
Parwelds smallest inverter MIG welder, the XTM 201i is suitable for use with both gas using solid wire or with gasless flux cored MIG wire. Welds materials up to 4mm with ease using either 0.8 or 1.0mm MIG wire. Synergic control of both volts and wire feed speed allows the user to infinitely adjust parameters to achieve optimum settings for the perfect weld. Digital displays show volts and wire feed speed, changing to amperage during the weld. A quality 2 roll wire feed ensures hassle free and smooth wire feed. A guide roller is included with the machine with grooves for both 0.8 and 1.0mm wires, easily changeable by removing and turning the roller. An industry standard euro torch connection allows the use of all good quality MIG torches. Supplied with the Parweld Eco-grip Max 150A MIG torch, taking industry standard Binzel style spares available from any welding supplier. Perfect for in the workshop or for mobile use, the Parweld XTM range of machines are lightweight and housed in rugged cases for durability.KEY FEATURES
- Weld Steel, Stainless Steel or Aluminium (up to 4mm thickness)
- 230V single phase
- 200A @ 25% duty cycle
- 2 roll drive wire feeder
- Use gas with solid MIG wire or reverse polarity and use gas less, self shielding MIG wire
- Infinitely adjustable voltage (18 – 26.5V)
- Infinitely variable wire feed speed (2 – 18m/min)
- Adjustable burnback control
- Variable inductance
- Overload warning indicator
- Built in gas valve
- Use 5kg MIG wire spools
- Supplied with Parweld MIG torch – Integrated Knuckle Joint Systems allowing movements of the handle and neck independently from the cable assembly
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Max current | Wire size | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 200A | 0.8 – 1.0mm | 200A @ 25% | 469 x 223 x 421 mm / 15.5kg | 7 kVA |
Parweld XTM 211Di MIG Inverter 4-in-1 | Dual Voltage
Parweld XTM 211DI 4-in-1 Multi-Process MIG Inverter with AC/DC TIG & MMA
XTM 211DI Parweld Multiprocess – P2 Package Machine, TIG Torch and MIG Torch Package
The Parweld XTM211Di is a 4-in-1 multi-process MIG inverter that also carries the capabilities for DC TIG, AC TIG and MMA, all in one machine. High quality build and excellent functionality for outstanding welding characteristics on every weld. The XTM211 DI is unique from other multi-mode MIG machines in that it comes equipped with capabilities for AC/DC TIG. This machine is also set up for hosting both a MIG and TIG torch at the same time, as well as quick switching between TIG and MIG, for swift and easy use. To switch to MIG from TIG, simply put down the TIG torch, pick up the MIG one and press the trigger. The XTM 211 will detect the change in torches and automatically switch over to the correct function for you. Vice versa is also true of the MIG to TIG torches. This functionality also extends to the gases too. You can have both Argon and Argon Mix plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.Features:
Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past. Instant swapping between MIG and TIG processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button. Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework. Save and recall up to 9 job function settings for any desired process.
Superior arc control thanks to Pulse TIG function, for optimal heat control to ensure you don’t burn through your workpiece whilst welding it. Comes with HF (High Frequency) Start TIG ignition.
Synergic programming makes working out your weld settings easier than ever – by simply inputting the material and thickness of your desired workpiece, the inbuilt programming automatically calculates the optimum settings for you. Alternatively, for fine-tuning and to suit the more experienced welder, a manual setting selection mode is also available.
Connect to your smartphone via Bluetooth for modern control and parameter settings.
Machine comes with MMA lead set, 3m MIG Torch with Amperage Control, 12.5ft TIG Torch with Amperage Control, input cable and two gas hoses as standard.
SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 25% | |
| Generator size | 7 kVA | |
| Feed Roll | 2 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Style | Portable | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | 615 x 275 x 495 | |
| Weight (Kg) | 27.8 |
GYS Multi-Pearl 200.4XL Multi-Process 1ph Dual Voltage MIG/TIG/MMA 200Amp
Featuring inverter technology, the MULTIPEARL 200.4XL combines the MIG, TIG and MMA processes in a single product. Compact and lightweight, it will be an ideal ally on site and in maintenance workshops. It is suitable for welding most common materials (steel, stainless steel, aluminium and MIG brazing CuSi3).