Parweld XTT 202P AC/DC Pulsed TIG Welder
PARWELD XTT 202 AC/DC PULSED TIG WELDER
The Parweld XTT 202 AC/DC is a single phase AC/DC TIG welder. AC or DC current functions allow the user to TIG or MMA weld virtually any metal up to around 6mm. Square wave AC output and power pulsing maximises productivity whilst allowing the user to fine tune heat output. A lightweight and small size unit, the XTT 202P AC/DC can be used at home or in the workshop. Furthermore, these versatile little TIG welders are generator friendly, coping with ±15% voltage fluctuations. In TIG mode the Parweld XTT 202 can weld materials up to 6mm in thickness. In MMA mode, electrodes up to 4.8mm can be used with ease. Supplied with a Parweld PRO Grip 26 torch with ergonomic handle for increased welder comfort. A knuckle joint improves cable flexibility and increased dexterity.TIG WELDING
A high frequency start circuit makes for easy and uncontaminated arc starting, increasing Tungsten electrode life. Trigger latching allows the user to release the trigger during long welds to improve comfort. Simple adjustability.- Buttons to select between MMA and TIG modes, AC or DC as well as selecting 2T, 4T, HF start or lift TIG.
- 2 Arrow buttons allow the user to scroll through pre flow, start current, up slope, main current, background current, pulse frequency, pulse balance, down slope, final current and post flow. Once the LED indicates the parameter to set, simply turn the middle dial to change settings. (See product video tab above for demonstration)
KEY FEATURES
- 230V input
- 200A @ 25% duty cycle
- Square wave AC TIG mode
- Variable pulse frequency
- Variable AC frequency
- HF Arc starting
- Digital control
- Optional foot control
- Ergonomic and flexible 3 button TIG torch – on/off button and up/down amperage controls.
- Generator friendly
- Hot start function in MMA mode. The machine increases initial voltage to start the arc and then reduces once arc initiated.
- Adjustable pre and post flow gas, start and end currents as well as pulse frequency and balance
- Industrial 3550 panel socket connectors
- Sturdy metal case and carry handle and shoulder strap
- 3 year full warranty (return to base)
- Optional additional 3 year warranty service plan
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Slope Functions | Pre/Post flow functions | Pulse frequency | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 5 – 200A DC 10 – 200 AC | 0 – 10s | 0 – 10s | 250Hz | 200A @ 25% | 480 x 240 x 400 mm / 22kg | 5kVA |
Parweld XTM 211Di MIG Inverter 4-in-1 | Dual Voltage
Parweld XTM 211DI 4-in-1 Multi-Process MIG Inverter with AC/DC TIG & MMA
XTM 211DI Parweld Multiprocess – P1 Package Machine and MIG Torch Package
The Parweld XTM211Di is a 4-in-1 multi-process MIG inverter that also carries the capabilities for DC TIG, AC TIG and MMA, all in one machine. High quality build and excellent functionality for outstanding welding characteristics on every weld. The XTM211 DI is unique from other multi-mode MIG machines in that it comes equipped with capabilities for AC/DC TIG. This machine is also set up for hosting both a MIG and TIG torch at the same time, as well as quick switching between TIG and MIG, for swift and easy use. To switch to MIG from TIG, simply put down the TIG torch, pick up the MIG one and press the trigger. The XTM 211 will detect the change in torches and automatically switch over to the correct function for you. Vice versa is also true of the MIG to TIG torches. This functionality also extends to the gases too. You can have both Argon and Argon Mix plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.Features:
Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past. Instant swapping between MIG and TIG processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button. Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework. Save and recall up to 9 job function settings for any desired process.SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 25% | |
| Generator size | 7 kVA | |
| Feed Roll | 2 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Style | Portable | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | 615 x 275 x 495 | |
| Weight (Kg) | 27.8 |
Parweld XTM 221Di MIG Inverter 5-in-1 | MIG, TIG and Plasma | P1
Mig Welders, PARWELD MIG MACHINES, PARWELD TIG MACHINES, Plasma Cutters, Tig Welder, MIG Welding Machines, TIG Welding Machines
Parweld XTM 221DI 5-in-1 Multi-Process MIG Inverter with AC/DC TIG, MMA and Plasma Cutting
XTM 211DI Parweld Multiprocess – MIG Torch, Argon Regulator and MMA Lead Set Package
The Parweld XTM 221DI is a 5 in 1 multi process inverter for MIG, AC/DC TIG, stick Welding and even plasma cutting! With a click of the appropriate torch switch, this clever machine quickly changes to the process required. That’s no changing of torches, polarities or gases to change process, just pull the trigger of the MIG torch for MIG welding, then pull the trigger on the plasma torch to start cutting. Need to TIG weld Ali, no problem… Just press the TIG torch button or foot control to TIG weld with HF start. You can have both Argon and Argon Mix and compressed air plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used. Great for workshop use where space may be limited. A multi language, digital display is easy to set up, with minimal knowledge required. Enter the material, type and thickness for the process being used and the machine will set itself to optimal settings which can be tweaked as required. Rather set up manually? This can also be done. MIG Torch supplied comes with an amperage control on the handle. A remote control socket on the front of the machine also allows for use of a foot control for amperage control for TIG welding.Features:
- Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past.
- Instant swapping between MIG , TIG, MMA and Stick Welding processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button.
- Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework.
- Save and recall job function settings for any desired process.
- MIG Weld, down to 0.9mm thick material
- Pulse TIG function for superior arc control
- Dual voltage 110 / 230V
- Welding Capacity 6mm (230V input)
SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 30% | |
| Generator size | 7 kVA | |
| Feed Roll | 4 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Plasma (A) | 25A (110V), 40A (230V) | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | TBC | |
| Weight (Kg) | TBC |
Genset Weld Baby 180 Petrol Welder Generator
GENSET WELD BABY 180 – PORTABLE PETROL WELDER GENERATOR
The Genset WeldBaby is a portable petrol welder generator with both 110 and 230V DC power take off sockets. A 60% duty cycle at 165A is ample for all types of welding rods up to 4mm. Weighing just 35kg (dry), this is a very portable and lightweight machine, ideal for on site welding. Running from a quality Honda GX200 engine for ultimate reliability. Mobile welding van tight for space and near the weight limit? These are ideal. An engine driven welder provides power and a welding output wherever you are. No need for large generators to power welding sets, just pick it up, pull start and away you go. The Genset Weldbaby 180 comes with a 2 year warranty and is made in Italy.Features
The compact Weld Baby incorporates features such as:- Low oil cut out
- Auto idle device when no load is connected
- Switch breaker
- 1 x 16A 110V AC single phase socket (0.5kW)
- 1 x 16A 230V AC single phase socket (1kW)
- 40 – 165A DC Welding Output
- Duty Cycle @ 60% 165A
- 70V Open circuit voltage
- Stage 5 Honda GX 200 engine
- Portable Petrol Welder Generator
- Current range, continuous: 40 ÷ 165A
- Duty cycle: 165 A – 60%
- Open circuit voltage: 70 V
- Arc welding source in D.C. welding
- Welds any type of electrode, including cellulosic
- Fuel Tank Capacity 3 Litres
- Fuel consumption 1.8 Litres @ 75%
- Dry weight: 35 kg
- Dimensions: 510 x 440 x 460 mm
- Acoustic power LwA (pressure LpA): 98 dB(A)
Genset MPM 5/200 I-EL/H Petrol Welder Generator
Genset MPM 5/200 I-EL/H Petrol Welder Generator
The Genset MPM 5/200 petrol welder generator is an Italian made petrol engine driven welder generator. A stepless welding current adjustment from 30A to 200A allows the user to run up to 4mm welding rods (including cellulosic). The generator side of this Genset offers both a 110V socket and a 230V socket, perfect for on site work, running angle grinders, lighting etc. Portable, compact, lightweight and easily transportable engine driven welder, is equipped with Honda 3000 RPM engine and is fitted for remote control operation. An asyncronous alternator provides a better welding current quality, with a clean and distorsion free wave form. Just like all the GenSet engine driven welders it is designed to be used as both a generator and welder simultaneously, its simple and smart design allows easy handling too. Powered by a stage 5 compliant Honda GX390 engine, you can be rest assured that the machine is built to last and will stand up to Industrial use. Further features of the Genset MPM 5/200 is an electric start for easy starting, an arc force control switch and a voltmeter. A socket on the front of the machine accepts the connection of a remote control, for amperage control without having to move backwards and forwards to the machine.FEATURES
- Welding with cellulosic electrode
- Stepless current adjustment
- Remote control socket
- Arc Force Control switch
- Low oil level cut out device
- Earth leakage circuit breaker
- Power output protection
- 1 x 16A / 230V single phase EEC socket (2kVA)
- 1 x 16A / 110V single phase EEC socket (3.6kVA)
- Voltmeter
DC WELDING
| Amps range | 30 – 200A |
| Duty cycle @ 35% | 200A – 28V |
| Duty cycle @ 60% | 150A – 26V |
| Open Circuit Voltage (OCV) | 70V |
| Max Welding Rod | 4mm |
PETROL ENGINE
| Type | Honda GX390 – 1 Cylinder – 390cm³ |
| Max Power | 11HP (8.2kW) |
| Cooling System | Air |
| Fuel Tank Capacity | 6.1 Litres |
| Fuel Consumption @ 75% | 3.3 Litres/Hour |
DIMENSIONS
Measurement: 720mm x 480mm x 515mm (L x W x H) Dry Weight: 96KG
Genset MPM 5/180 I-D/AE-Y Diesel Welder Generator
Genset MPM 5/180 I-D/AE-Y Diesel Welder Generator
The Genset MPM 5/180 is an Italian made diesel engine driven welder generator. A stepless welding current adjustment from 40A to 170A allows the user to run up to 4mm welding rods. The generator side of this Genset offers both a 110V socket and a 230V socket, perfect for on site work, running angle grinders, lighting etc. This portable, compact, lightweight and easily transportable engine driven welder, is equipped with a Yanmar L100V 3000 RPM engine and is fitted for remote control operation. A quality alternator provides a better welding current quality, with a clean and distortion free wave form. Just like all the GenSet engine driven welders it is designed to be used as both a generator and welder simultaneously, its simple and smart design allows easy handling too. Powered by a stage 5 compliant Yanmar L100V engine, you can be rest assured that the machine is built to last and will stand up to Industrial use. Further features of the Genset MPM 5/180 is an electric start for easy starting, auto idle and a voltmeter.FEATURES
- Warning lights for battery charger failure and low oil pressure
- 12V battery
- Stepless current adjustment
- Earth leakage circuit breaker
- Power output protection
- 1 x 16A / 230V single phase EEC socket (4kVA)
- 1 x 16A / 110V single phase EEC socket (2kVA)
- Voltmeter
DC WELDING
| Amps range | 40 – 170A |
| Duty cycle @ 35% | 170A – 27V |
| Duty cycle @ 60% | 140A – 26V |
| Open Circuit Voltage (OCV) | 90V |
| Max Welding Rod | 4mm |
PETROL ENGINE
| Type | Yanmar L100V – 1 Cylinder – 435cm³ |
| Starting System | Electric (12VDC) |
| Cooling System | Air |
| Fuel Tank Capacity | 5.5 Litres |
| Fuel Consumption @ 75% | 1.45 Litres/Hour |
DIMENSIONS
Measurement: 920mm x 460mm x 570mm (L x W x H) Dry Weight: 148KG
Genset MPM 8/300 I-K Diesel Welder Generator
GENSET 300 IK DIESEL WELDER GENERATOR
The Genset 300 IK diesel welder generator is an Italian made machine offering 300 amps welding output, as well as 110, 230 and 400V power too. Fairly lightweight within its class, we have found these to be a good solution for vehicle mounted welding plant. Couple this with the ability to use a MIG wire feed unit thanks to the constant current, constant voltage welding output, it is an ideal mobile welding set. Further features include engine auto idle, a remote control socket and an arc force control switch. A Kubota diesel engine powers this capable Genset, allowing welding of up to 6mm electrodes. Its many features and quality build enable this machine to be used for the most industrial of applications.DC WELDING
| Amps range | 30 – 300A |
| Duty cycle @ 35% | 300A – 32V |
| Duty cycle @ 60% | 270A – 31V |
| Open Circuit Voltage (OCV) | 70V |
| Max Welding Rod | 6mm |
DIESEL ENGINE
| Type | Kubota – 3 Cylinder – 719cm³ |
| Max Power | 19.4HP (14.4kW/m) |
| Cooling System | Water |
| Fuel Tank Capacity | 30 Litres |
| Fuel Consumption @ 75% | 3.3 Litres/Hour |
DIMENSIONS
1360 X 530 X 870mm (Length x Width x Height) Dry Weight 345KG
Genset MPM 9/300 I-Y Diesel Welder Generator (Yanmar)
GENSET 300 IY DIESEL WELDER GENERATOR (YANMAR ENGINE)
The Genset 300 IY diesel welder generator is an Italian made machine offering 300 amps welding output, as well as 110, 230 and 400V power too. Fairly lightweight within its class, we have found these to be a good solution for vehicle mounted welding plant. Couple this with the ability to use a MIG wire feed unit thanks to the constant current, constant voltage welding output, it is an ideal mobile welding set. Further features include engine auto idle, a remote control socket and an arc force control switch. A Yanmar diesel engine powers this capable Genset, allowing welding of up to 6mm electrodes. Its many features and quality build enable this machine to be used for the most industrial of applications.FEATURES
- Controller (DSE 3110) with digital display for full monitoring of generator parameters
- Fuel level gauge
- Remote control socket
- Automatic idle device when no load is connected
- 1 x 16A 400V Three phase EEC socket
- 1 x 32A 230V Single phase EEC socket
- 1 x 32A 110V Single phase EEC socket
- Earth leakage circuit breaker
- 12V battery
- Hourmeter
- Emergency stop button
- Central lifting eye
DC WELDING
| Amps range | 30 – 300A |
| Duty cycle @ 35% | 300A – 32V |
| Duty cycle @ 60% | 270A – 31V |
| Open Circuit Voltage (OCV) | 70V |
| Max Welding Rod | 6mm |
DIESEL ENGINE
| Type | Yanmar – 3 Cylinder – 904cm³ |
| Max Power | 19.4HP (14.4kW/m) |
| Cooling System | Water |
| Fuel Tank Capacity | 50 Litres |
| Fuel Consumption @ 75% | 5.1 Litres/Hour |
DIMENSIONS
1360 X 530 X 870mm (Length x Width x Height) Dry Weight 385KG
Genset MPM 9/310 SS-Y Diesel Welder Generator GEN-300DY
GENSET 300 DY DIESEL WELDER GENERATOR (YANMAR ENGINE)
The Genset 300 DY diesel welder generator is an Italian made machine offering 300 amps welding output, as well as 110, 230 and 400V power too. A good solution for vehicle mounted welding plant for off grid power and welding. Couple this with the ability to use a MIG wire feed unit thanks to the constant current, constant voltage welding output, it is an ideal mobile welding set. Further features include engine auto idle, a remote control socket and an arc force control switch. A Yanmar diesel engine powers this capable Genset, allowing welding of up to 6mm electrodes. Its many features and quality build enable this machine to be used for the most industrial of applications.FEATURES
- Auto engine protection shutdown system with warning lights for: battery charger failure, low fuel level, low oil pressure and high water temperature
- Arc Force Control switch
- Remote control socket
- Automatic idle device when no load is connected
- 1 x 16A 400V Three phase EEC socket
- 1 x 32A 230V Single phase EEC socket
- 1 x 32A 110V Single phase EEC socket
- Earth leakage circuit breaker
- Power output protection
- 12V battery
- Fuel level gauge
- Hourmeter
- Voltmeter
- Emergency stop button
- Engine oil drain pipe
- Bunded base to retain all liquids
- Central lifting eye
DC WELDING
| Amps range | 30 – 300A |
| Duty cycle @ 35% | 300A – 32V |
| Duty cycle @ 60% | 270A – 31V |
| Open Circuit Voltage (OCV) | 70V |
| Max Welding Rod | 6mm |
DIESEL ENGINE
| Type | Yanmar 3TMN72 – 3 Cylinder – 904cm³ |
| Max Power | 19.4HP (14.4kW/m) |
| Cooling System | Water |
| Fuel Tank Capacity | 50 Litres |
| Fuel Consumption @ 75% | 5.1 Litres/Hour |
DIMENSIONS
1530 X 683 X 1142mm (Length x Width x Height) Dry Weight 475KG
GYS Easycut K35 Plasma Cutter With Built in Compressor 230v
With its integrated air compressor, the EASYCUT K35 PFC can be used to cut metal wherever a single-phase
power supply is available. PFC technology allows operation between 195 V and 265 V, so you can get a highquality cut even when using 100 m extension leads. Small, light and portable, it can deliver 35 A of power to
cut different types of metal, up to 15 mm thick.
Cuts... 15mm Separation and 10mm Clean Cut
Parweld XTM 221Di MIG Inverter 5-in-1 | MIG, TIG and Plasma | P2
PARWELD MIG MACHINES, PARWELD STICK MACHINES, PARWELD TIG MACHINES, MIG Welding Machines, TIG Welding Machines
Features:
- Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past.
- Instant swapping between MIG , TIG, MMA and Stick Welding processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button.
- Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework.
- Save and recall job function settings for any desired process.
- MIG Weld, down to 0.9mm thick material
- Pulse TIG function for superior arc control
- Dual voltage 110 / 230V
- Welding Capacity 6mm (230V input)
Parweld XTM 356i Inverter MIG Welder Package
-
KEY FEATURES
- Weld Steel, Stainless Steel, Aluminium, or flux cored gasless
- 400V 3 Phase
- Duty cycle:
- 400V 250A @ 40%
- 4 roll drive wire feeder
- Infinitely adjustable voltage (15.5-31.5V)
- Burnback control
- Polarity switching for running gasless or solid MIG wires.
- Adjustable inductance.
- Choose between manual set up or synergic
- 2T – Hold button in to weld and release when finished
- 4T – Press and release to start, press and release to finish
- Fan on demand for quiet and energy efficient operation
- Takes 5KG or 15KG MIG wire spools
- Supplied with Parweld MIG torch (XP200A 4m)
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
- Current Range: Up to 350A
- 3 Ph 400V
- Weight: 24.5 Kg
- FREE DELIVERY