Parweld XTS 166 RC Dual Voltage MMA Welder
PARWELD XTS 166 RC DUAL VOLTAGE STICK WELDER
The Parweld XTS 166 remote control stick welder is ideal for site work. A 110V stick welder, also capable of running from 230V for maximum flexibility. The addition of a remote control on a 4m lead allows the user to adjust amperage remotely from the machine, excellent for welding at height or in confined areas where having the machine next to the job isn’t possible/ideal. Its small size and light weight make it perfect for mobile applications where the machine can be kept in a van etc. Similarly, these units are equally suitable for home use. Arc force and hot start technology makes striking and re striking electrodes easy. Hot start increases current during arc initiation to get the weld started, whilst arc force kicks in if the arc distance becomes too short helping to stop the electrode sticking during the weld. The Parweld XTS 166 RC is generator friendly too, capable of coping with power inputs with a fluctuation tolerance of ± 15%. Lift start TIG welding can also be done with the XTS 166 RC using a basic TIG torch with manual gas valve – see related products. Using a suitable gas supply TIG welding of steel and stainless steel is possible (40A minimum). Lift start TIG limits the arc current when the tungsten touches the work piece preventing electrode damage. Simply touch the work piece to get the arc started and then lift slightly before welding.KEY FEATURES
- 110V / 230V single phase
- 160A @ 40% duty cycle (230V)
- 35-50 panel socket connections
- Supplied with 3m electrode holder lead, 3m earth lead with clamp and 4m remote control pendant.
- Weld up to 4mm steel
- Welds rutile, basic and cellulosic electrodes
- Lightweight – just 4.8kg
- Digital amperage display
- Over voltage and over current protection
- Built in electrode anti sticking
- 81V no load voltage
- 3 year return to base warranty
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Max electrode size | Enclosure protection | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V 110V | 16A 32A | 10 – 160A 10 – 125A | 4mm | IP23S | 160A @ 40% (230V) | 375 x 140 x 245 mm / 7.0kg | 6kVA |
Parweld XTM 201i MIG Welder
PARWELD XTM 201i MIG WELDING INVERTER
Parwelds smallest inverter MIG welder, the XTM 201i is suitable for use with both gas using solid wire or with gasless flux cored MIG wire. Welds materials up to 4mm with ease using either 0.8 or 1.0mm MIG wire. Synergic control of both volts and wire feed speed allows the user to infinitely adjust parameters to achieve optimum settings for the perfect weld. Digital displays show volts and wire feed speed, changing to amperage during the weld. A quality 2 roll wire feed ensures hassle free and smooth wire feed. A guide roller is included with the machine with grooves for both 0.8 and 1.0mm wires, easily changeable by removing and turning the roller. An industry standard euro torch connection allows the use of all good quality MIG torches. Supplied with the Parweld Eco-grip Max 150A MIG torch, taking industry standard Binzel style spares available from any welding supplier. Perfect for in the workshop or for mobile use, the Parweld XTM range of machines are lightweight and housed in rugged cases for durability.KEY FEATURES
- Weld Steel, Stainless Steel or Aluminium (up to 4mm thickness)
- 230V single phase
- 200A @ 25% duty cycle
- 2 roll drive wire feeder
- Use gas with solid MIG wire or reverse polarity and use gas less, self shielding MIG wire
- Infinitely adjustable voltage (18 – 26.5V)
- Infinitely variable wire feed speed (2 – 18m/min)
- Adjustable burnback control
- Variable inductance
- Overload warning indicator
- Built in gas valve
- Use 5kg MIG wire spools
- Supplied with Parweld MIG torch – Integrated Knuckle Joint Systems allowing movements of the handle and neck independently from the cable assembly
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Max current | Wire size | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 200A | 0.8 – 1.0mm | 200A @ 25% | 469 x 223 x 421 mm / 15.5kg | 7 kVA |
Parweld XTM 256i Inverter MIG Welder
PARWELD XTM 256i MIG WELDING INVERTER
The Parweld XTM 256i is the brand new, three phase inverter MIG welder. This Multi-process MIG Machine can also deliver Lift TIG and MMA, so you can get all your favourite processes in one system. This high-performance inverter is suitable for use with a 5kg (200mm) or 15kg (300mm) wire spool and puts out 250A of power. The XTM 256i MIG is also suitable for welding materials with ease using anywhere between 0.6 – 1.2mm MIG wire. Suitable for everyone from absolute beginners to professionals with decades of experience!FUNCTIONS
Infinite control of both volts (MIG Range: 14.5 – 26.5V) and wire feed speed allows the user to adjust parameters to achieve optimum settings for the perfect weld. LED digital display show all parameters in real time for quick, easy, and accurate adjustment of weld settings. A settings chart inside the wire feed door show quick and easy reference voltage and wire feed settings for optimal set up. Fitted with a set of quality 4 roll wire feed rollers, ensuring hassle free and smooth wire feed with even the most delicate MIG wire materials. A set of 0.8/1.0 V groove rollers comes included with the standard machine. 2T/4T control functions available. 2T is a simple press-on/lift-off button control, which keeps the current running when pressed down and cuts power when not. 4T is a system where, once the button is pressed, the arc will stay running until the button is pressed again, making it ideal for longer welding runs. An industry-standard euro torch connection allows the use of all good quality MIG torches. P1 Package supplied with the Parweld XP200A 4 metre MIG torch. Perfect for in the workshop the Parweld XTM 256i is supplied pre-built on a trolley, complete with a drawer and an integrated gas bottle shelf behind the machine. The XTM 256I supports lift TIG functionality, with a connection for a switch plug and a gas connection. Many machines with Lift TIG functionality do not have these features. Gas is often controlled via a manual gas valve on the torch which can be fiddly and waste gas! Press the trigger on the optional TIG torch to start pre flow and start the weld and finish the weld when releasing the button.WHAT IS SYNERGIC PROGRAMMING?
Parweld have designed this MIG inverter with ease-of-use in mind, and thanks to their synergic control, finding the optimal settings has never been easier. Synergic programming, as seen in the XTM 256i MIG Inverter, is a self-adjusting parameter set-up. Simply input your wire type and diameter, then select your amperage and the machine will adjust accordingly. It couldn’t be easier. Suitable for those still learning to weld or for the pros that want a simpler way of finding their optimum settings. This is the perfect beginner’s welding machine. To fine tune the settings, a voltage trim is available to dial in the weld characteristics.
KEY FEATURES
- Weld Steel, Stainless Steel, Aluminium, or flux cored gasless
- 110V / 230V single phase
- Duty cycle:
- 400V 250A @35%
- 4 roll drive wire feeder
- Infinitely adjustable voltage (14.5 – 26.5V)
- Burnback control
- Polarity switching for running gasless or solid MIG wires.
- Adjustable inductance.
- Choose between manual set up or synergic
- 2T – Hold button in to weld and release when finished
- 4T – Press and release to start, press and release to finish
- Fan on demand for quiet and energy efficient operation
- Takes 5KG or 15KG MIG wire spools
- Supplied with Parweld MIG torch (XP200A 4m)
- 3 year no quibble return to base warranty
- Manufactured to IP21S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
TECHNICAL INFORMATION |
|
| Style | Portable |
| Machine Type | Inverter MIG/TIG/MMA |
| Voltage Range | MIG 14.5-26.5V TIG 10.4-20V MMA 20.4-30V |
| Spool Size | 300mm (15kg) 200mm (5kg) |
| Feed Box | 4 Roll |
| Wire Size | 0.6 – 1.2 mm |
| Duty Cycle | 250A @ 35% |
| Input Voltage | 400V |
| Maximum Current | 250A |
| Input Current (Eff) | MIG – 9.3A TIG – 7.9A MMA – 10.9A |
| Minimum Fuse Rating | 20A |
| KVA | 11.6 |
| Generator Size | 13 KVA |
| Enclosure Protection | IP23S |
| Dimensions (LxWxH mm) | 660 x 280 x 500 |
| Weight (kg) | 23 |
PACKAGES (Select from drop down)
SUPPLIED WITH |
|
| Machine with trolley (XTM256i) | Power source with trolley, work return lead, and gas hose |
| Machine and P1 Package (XTM256i-P1) | Power source with trolley, work return lead, gas hose, XP200A 4m long MIG torch, and gas regulator |
| Machine and P2 Package (XTM256i-P2) | Power source with trolley, work return lead, gas hose, XP200A 4m long MIG torch, PRO26 12ft TIG torch, 3m MMA electrode lead, and gas regulator |
Parweld XTM 211Di MIG Inverter 4-in-1 | Dual Voltage
Parweld XTM 211DI 4-in-1 Multi-Process MIG Inverter with AC/DC TIG & MMA
XTM 211DI Parweld Multiprocess – P2 Package Machine, TIG Torch and MIG Torch Package
The Parweld XTM211Di is a 4-in-1 multi-process MIG inverter that also carries the capabilities for DC TIG, AC TIG and MMA, all in one machine. High quality build and excellent functionality for outstanding welding characteristics on every weld. The XTM211 DI is unique from other multi-mode MIG machines in that it comes equipped with capabilities for AC/DC TIG. This machine is also set up for hosting both a MIG and TIG torch at the same time, as well as quick switching between TIG and MIG, for swift and easy use. To switch to MIG from TIG, simply put down the TIG torch, pick up the MIG one and press the trigger. The XTM 211 will detect the change in torches and automatically switch over to the correct function for you. Vice versa is also true of the MIG to TIG torches. This functionality also extends to the gases too. You can have both Argon and Argon Mix plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.Features:
Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past. Instant swapping between MIG and TIG processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button. Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework. Save and recall up to 9 job function settings for any desired process.
Superior arc control thanks to Pulse TIG function, for optimal heat control to ensure you don’t burn through your workpiece whilst welding it. Comes with HF (High Frequency) Start TIG ignition.
Synergic programming makes working out your weld settings easier than ever – by simply inputting the material and thickness of your desired workpiece, the inbuilt programming automatically calculates the optimum settings for you. Alternatively, for fine-tuning and to suit the more experienced welder, a manual setting selection mode is also available.
Connect to your smartphone via Bluetooth for modern control and parameter settings.
Machine comes with MMA lead set, 3m MIG Torch with Amperage Control, 12.5ft TIG Torch with Amperage Control, input cable and two gas hoses as standard.
SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 25% | |
| Generator size | 7 kVA | |
| Feed Roll | 2 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Style | Portable | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | 615 x 275 x 495 | |
| Weight (Kg) | 27.8 |
Parweld XTP 103 Inverter Plasma Cutter
Parweld XTP 103 Inverter Plasma Cutter
The Parweld XTP 103 Plasma Cutter is a powerful, robust three-phase plasma inverter. A variable output is ideal for cutting metals up to 30mm thick cleanly or up to 50mm with a severance edge. Infinite power control on-board for fine-tuning to minimise dross and deliver a clean cutting edge. A clean cut edge reduces post cut clean up and increases productivity. On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this system provides easy cutting of mesh or perforated materials. Machine comes housed in a metal case equipped with a carry handle. A CNC Interface makes for easy coupling with a plasma cutting CNC table when coupled with a machine torch. Material thicknesses:- Recommended: 30mm
- Severance cut: 50mm
Compatible with Generators:
The XTP 103 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%. Requires compressor that can generate 200Lpm @5 Bar, 4.5CFM @ 75 PSI.This machine comes with:
- XTA141 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 630mm X 310mm X 540mm |
| Enclosure Protection | IP23S |
| Amperage Range | 20A – 100A |
| Starting Method | HF |
| Fuse Rating | 32A |
| Duty cycle | 100% @ 100A |
| Cut Capacity | 30mm Clean / 50mm Severance |
| Generator KVA Input | 15 |
| Weight (Kg) | 40.6 |
Parweld XTT 353P AC/DC Pulsed TIG Welder
PARWELD XTT 353P AC/DC PULSED TIG WELDER
The Parweld XTT 353P AC/DC is a 3 phase TIG welding inverter with full TIG welding parameter adjustment. Square wave AC output and power pulsing maximises productivity whilst allowing the user to fine tune heat output. The XTT 353 P AC/DC is an industrial machine and is generator friendly, coping with ±15% voltage fluctuations. In TIG mode the Parweld XTT 353P can weld materials up to 9mm in thickness. The XTT can also be used in MMA mode. The XTT 353 air cooled package supplied with a Parweld PRO Grip 26 torch with ergonomic handle for increased welder comfort. A knuckle joint improves cable flexibility and increased dexterity. Water cooled package supplied with a Parweld PRO Grip 18 water cooled torch also with ergonomic handle.TIG WELDING
A high frequency start circuit makes for easy and uncontaminated arc starting, increasing Tungsten electrode life. Trigger latching allows the user to release the trigger during long welds to improve comfort. Simple adjustability. Buttons to select between MMA and TIG modes, AC or DC as well as selecting 2T, 4T, HF start or lift TIG. 2 Arrow buttons allow the user to scroll through pre flow, start current, up slope, main current, background current, pulse frequency, pulse balance, down slope, final current and post flow. Once the LED indicates the parameter to set, simply turn the middle dial to change settings. (See product video tab above for demonstration – video shows the single phase XTT 202P but controls remain the same)KEY FEATURES
- 400V input
- 350A @ 50% duty cycle
- Square wave AC TIG mode
- Variable pulse frequency
- Variable AC frequency
- HF Arc starting
- Digital control
- Optional foot control
- Ergonomic and flexible 3 button TIG torch – on/off button and up/down amperage controls.
- Generator friendly
- Hot start function in MMA mode. The machine increases initial voltage to start the arc and then reduces once arc initiated.
- Adjustable pre and post flow gas, start and end currents as well as pulse frequency and balance
- Industrial 3550 panel socket connectors
- 3 year full warranty (return to base)
- Optional additional 3 year warranty service plan
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Slope Functions | Pre/Post flow functions | Pulse rating | AC frequency | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 400V | 16A | 5 – 350A DC 10 – 350 AC | 0 – 10s | 0 – 10s | 0.5 – 200Hz | 50 – 250Hz | 350A @ 50% | 606 x 315 x 540 mm / 38kg | 13kVA |
Parweld XTT 202P AC/DC Pulsed TIG Welder
PARWELD XTT 202 AC/DC PULSED TIG WELDER
The Parweld XTT 202 AC/DC is a single phase AC/DC TIG welder. AC or DC current functions allow the user to TIG or MMA weld virtually any metal up to around 6mm. Square wave AC output and power pulsing maximises productivity whilst allowing the user to fine tune heat output. A lightweight and small size unit, the XTT 202P AC/DC can be used at home or in the workshop. Furthermore, these versatile little TIG welders are generator friendly, coping with ±15% voltage fluctuations. In TIG mode the Parweld XTT 202 can weld materials up to 6mm in thickness. In MMA mode, electrodes up to 4.8mm can be used with ease. Supplied with a Parweld PRO Grip 26 torch with ergonomic handle for increased welder comfort. A knuckle joint improves cable flexibility and increased dexterity.TIG WELDING
A high frequency start circuit makes for easy and uncontaminated arc starting, increasing Tungsten electrode life. Trigger latching allows the user to release the trigger during long welds to improve comfort. Simple adjustability.- Buttons to select between MMA and TIG modes, AC or DC as well as selecting 2T, 4T, HF start or lift TIG.
- 2 Arrow buttons allow the user to scroll through pre flow, start current, up slope, main current, background current, pulse frequency, pulse balance, down slope, final current and post flow. Once the LED indicates the parameter to set, simply turn the middle dial to change settings. (See product video tab above for demonstration)
KEY FEATURES
- 230V input
- 200A @ 25% duty cycle
- Square wave AC TIG mode
- Variable pulse frequency
- Variable AC frequency
- HF Arc starting
- Digital control
- Optional foot control
- Ergonomic and flexible 3 button TIG torch – on/off button and up/down amperage controls.
- Generator friendly
- Hot start function in MMA mode. The machine increases initial voltage to start the arc and then reduces once arc initiated.
- Adjustable pre and post flow gas, start and end currents as well as pulse frequency and balance
- Industrial 3550 panel socket connectors
- Sturdy metal case and carry handle and shoulder strap
- 3 year full warranty (return to base)
- Optional additional 3 year warranty service plan
- Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant
SPECIFICATION
| Input Supply 50/60Hz | Fuse amps | Amperage range | Slope Functions | Pre/Post flow functions | Pulse frequency | Duty Cycle | Dimensions / Weight | Generator requirements (+/-15%) |
| 230V | 16A | 5 – 200A DC 10 – 200 AC | 0 – 10s | 0 – 10s | 250Hz | 200A @ 25% | 480 x 240 x 400 mm / 22kg | 5kVA |
Parweld XTM 211Di MIG Inverter 4-in-1 | Dual Voltage
Parweld XTM 211DI 4-in-1 Multi-Process MIG Inverter with AC/DC TIG & MMA
XTM 211DI Parweld Multiprocess – P1 Package Machine and MIG Torch Package
The Parweld XTM211Di is a 4-in-1 multi-process MIG inverter that also carries the capabilities for DC TIG, AC TIG and MMA, all in one machine. High quality build and excellent functionality for outstanding welding characteristics on every weld. The XTM211 DI is unique from other multi-mode MIG machines in that it comes equipped with capabilities for AC/DC TIG. This machine is also set up for hosting both a MIG and TIG torch at the same time, as well as quick switching between TIG and MIG, for swift and easy use. To switch to MIG from TIG, simply put down the TIG torch, pick up the MIG one and press the trigger. The XTM 211 will detect the change in torches and automatically switch over to the correct function for you. Vice versa is also true of the MIG to TIG torches. This functionality also extends to the gases too. You can have both Argon and Argon Mix plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used.Features:
Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past. Instant swapping between MIG and TIG processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button. Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework. Save and recall up to 9 job function settings for any desired process.SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 25% | |
| Generator size | 7 kVA | |
| Feed Roll | 2 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Style | Portable | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | 615 x 275 x 495 | |
| Weight (Kg) | 27.8 |
Parweld XTM 221Di MIG Inverter 5-in-1 | MIG, TIG and Plasma | P1
Mig Welders, PARWELD MIG MACHINES, PARWELD TIG MACHINES, Plasma Cutters, Tig Welder, MIG Welding Machines, TIG Welding Machines
Parweld XTM 221DI 5-in-1 Multi-Process MIG Inverter with AC/DC TIG, MMA and Plasma Cutting
XTM 211DI Parweld Multiprocess – MIG Torch, Argon Regulator and MMA Lead Set Package
The Parweld XTM 221DI is a 5 in 1 multi process inverter for MIG, AC/DC TIG, stick Welding and even plasma cutting! With a click of the appropriate torch switch, this clever machine quickly changes to the process required. That’s no changing of torches, polarities or gases to change process, just pull the trigger of the MIG torch for MIG welding, then pull the trigger on the plasma torch to start cutting. Need to TIG weld Ali, no problem… Just press the TIG torch button or foot control to TIG weld with HF start. You can have both Argon and Argon Mix and compressed air plugged into the machine and the inverter will switch between the gases automatically based on which process it detects is being used. Great for workshop use where space may be limited. A multi language, digital display is easy to set up, with minimal knowledge required. Enter the material, type and thickness for the process being used and the machine will set itself to optimal settings which can be tweaked as required. Rather set up manually? This can also be done. MIG Torch supplied comes with an amperage control on the handle. A remote control socket on the front of the machine also allows for use of a foot control for amperage control for TIG welding.Features:
- Auto polarity switching inside. Changing the work lead connections on the front of the machine is a thing of the past.
- Instant swapping between MIG , TIG, MMA and Stick Welding processes available with one touch of a torch trigger, thus perfect for a versatile workshop, able to switch between any job or any part of a job with the press of a button.
- Modern, multi-language digital user interface/display, alongside simple and intuitive selection options, allows for easy navigation through the synergic programs on board. Appropriate for workshop and sitework.
- Save and recall job function settings for any desired process.
- MIG Weld, down to 0.9mm thick material
- Pulse TIG function for superior arc control
- Dual voltage 110 / 230V
- Welding Capacity 6mm (230V input)
SPECIFICATION
| Input Voltage (Smart Switching) | AC 110V – 50/60 Hz | AC 230V – 50/60 Hz |
| Min Fuse Rating | 32A | 16A |
| Input Power (kVA) | 3.7 | 3.7 |
| Max Current (A) | MIG 140 TIG 140 MMA 110 | MIG 200 TIG 200 MMA 200 |
| Duty Cycle @ 40’C | MIG 200A @ 30% | |
| Generator size | 7 kVA | |
| Feed Roll | 4 Roll | |
| Wire Spool Size | 300mm 15KG 200mm 5KG | |
| Wire Size | 0.6 – 1.0mm | |
| Plasma (A) | 25A (110V), 40A (230V) | |
| Machine Type | Inverter | |
| Protection Class | IP23S | |
| Dimensions | TBC | |
| Weight (Kg) | TBC |
Genset Weld Baby 180 Petrol Welder Generator
GENSET WELD BABY 180 – PORTABLE PETROL WELDER GENERATOR
The Genset WeldBaby is a portable petrol welder generator with both 110 and 230V DC power take off sockets. A 60% duty cycle at 165A is ample for all types of welding rods up to 4mm. Weighing just 35kg (dry), this is a very portable and lightweight machine, ideal for on site welding. Running from a quality Honda GX200 engine for ultimate reliability. Mobile welding van tight for space and near the weight limit? These are ideal. An engine driven welder provides power and a welding output wherever you are. No need for large generators to power welding sets, just pick it up, pull start and away you go. The Genset Weldbaby 180 comes with a 2 year warranty and is made in Italy.Features
The compact Weld Baby incorporates features such as:- Low oil cut out
- Auto idle device when no load is connected
- Switch breaker
- 1 x 16A 110V AC single phase socket (0.5kW)
- 1 x 16A 230V AC single phase socket (1kW)
- 40 – 165A DC Welding Output
- Duty Cycle @ 60% 165A
- 70V Open circuit voltage
- Stage 5 Honda GX 200 engine
- Portable Petrol Welder Generator
- Current range, continuous: 40 ÷ 165A
- Duty cycle: 165 A – 60%
- Open circuit voltage: 70 V
- Arc welding source in D.C. welding
- Welds any type of electrode, including cellulosic
- Fuel Tank Capacity 3 Litres
- Fuel consumption 1.8 Litres @ 75%
- Dry weight: 35 kg
- Dimensions: 510 x 440 x 460 mm
- Acoustic power LwA (pressure LpA): 98 dB(A)
Genset MPM 5/200 I-EL/H Petrol Welder Generator
Genset MPM 5/200 I-EL/H Petrol Welder Generator
The Genset MPM 5/200 petrol welder generator is an Italian made petrol engine driven welder generator. A stepless welding current adjustment from 30A to 200A allows the user to run up to 4mm welding rods (including cellulosic). The generator side of this Genset offers both a 110V socket and a 230V socket, perfect for on site work, running angle grinders, lighting etc. Portable, compact, lightweight and easily transportable engine driven welder, is equipped with Honda 3000 RPM engine and is fitted for remote control operation. An asyncronous alternator provides a better welding current quality, with a clean and distorsion free wave form. Just like all the GenSet engine driven welders it is designed to be used as both a generator and welder simultaneously, its simple and smart design allows easy handling too. Powered by a stage 5 compliant Honda GX390 engine, you can be rest assured that the machine is built to last and will stand up to Industrial use. Further features of the Genset MPM 5/200 is an electric start for easy starting, an arc force control switch and a voltmeter. A socket on the front of the machine accepts the connection of a remote control, for amperage control without having to move backwards and forwards to the machine.FEATURES
- Welding with cellulosic electrode
- Stepless current adjustment
- Remote control socket
- Arc Force Control switch
- Low oil level cut out device
- Earth leakage circuit breaker
- Power output protection
- 1 x 16A / 230V single phase EEC socket (2kVA)
- 1 x 16A / 110V single phase EEC socket (3.6kVA)
- Voltmeter
DC WELDING
| Amps range | 30 – 200A |
| Duty cycle @ 35% | 200A – 28V |
| Duty cycle @ 60% | 150A – 26V |
| Open Circuit Voltage (OCV) | 70V |
| Max Welding Rod | 4mm |
PETROL ENGINE
| Type | Honda GX390 – 1 Cylinder – 390cm³ |
| Max Power | 11HP (8.2kW) |
| Cooling System | Air |
| Fuel Tank Capacity | 6.1 Litres |
| Fuel Consumption @ 75% | 3.3 Litres/Hour |
DIMENSIONS
Measurement: 720mm x 480mm x 515mm (L x W x H) Dry Weight: 96KG
Genset MPM 5/180 I-D/AE-Y Diesel Welder Generator
Genset MPM 5/180 I-D/AE-Y Diesel Welder Generator
The Genset MPM 5/180 is an Italian made diesel engine driven welder generator. A stepless welding current adjustment from 40A to 170A allows the user to run up to 4mm welding rods. The generator side of this Genset offers both a 110V socket and a 230V socket, perfect for on site work, running angle grinders, lighting etc. This portable, compact, lightweight and easily transportable engine driven welder, is equipped with a Yanmar L100V 3000 RPM engine and is fitted for remote control operation. A quality alternator provides a better welding current quality, with a clean and distortion free wave form. Just like all the GenSet engine driven welders it is designed to be used as both a generator and welder simultaneously, its simple and smart design allows easy handling too. Powered by a stage 5 compliant Yanmar L100V engine, you can be rest assured that the machine is built to last and will stand up to Industrial use. Further features of the Genset MPM 5/180 is an electric start for easy starting, auto idle and a voltmeter.FEATURES
- Warning lights for battery charger failure and low oil pressure
- 12V battery
- Stepless current adjustment
- Earth leakage circuit breaker
- Power output protection
- 1 x 16A / 230V single phase EEC socket (4kVA)
- 1 x 16A / 110V single phase EEC socket (2kVA)
- Voltmeter
DC WELDING
| Amps range | 40 – 170A |
| Duty cycle @ 35% | 170A – 27V |
| Duty cycle @ 60% | 140A – 26V |
| Open Circuit Voltage (OCV) | 90V |
| Max Welding Rod | 4mm |
PETROL ENGINE
| Type | Yanmar L100V – 1 Cylinder – 435cm³ |
| Starting System | Electric (12VDC) |
| Cooling System | Air |
| Fuel Tank Capacity | 5.5 Litres |
| Fuel Consumption @ 75% | 1.45 Litres/Hour |
Mig Welders
Stick/MMA Welding Machines